EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

A Critical Review on Tensile Behavior and Johnson-CookConstitutive Model Calibration of Wire Arc Additive Manufactured Materials

Xin Liu

X-Disciplinarity · 18.05.2026 · 2 (2) · 3

DOI: 10.63174/xdi.bepo1073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift X-Disciplinarity, online erschienen am 18.05.2026. Verfasst von Xin Liu. Die Arbeit nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wire arc additive manufacturing (WAAM) has emerged as a key near-net-shape fabrication route for large-scale aerospace metallic components, offering deposition rates of 3-10 kg/h and material utilization exceeding 90%. However, the non-equilibrium microstructures formed under repeated WAAM thermal cycling — comprising coarse columnar grains, heterogeneous Laves phase, Widmanstatten lamellar alpha, and gradient in-situ aging precipitates — render the mechanical behavior of as-deposited materials fundamentally distinct from wrought counterparts. This disparity gives rise to a systematic 'parameter transplantation fallacy' in engineering simulations that rely on Johnson-Cook (JC) constitutive parameters calibrated from forged stock. The present review systematically examines 69 representative studies published between 2009 and 2026, covering three representative WAAM structural materials: Inconel 718, Ti-6Al-4V (TC4), and 18Ni300 maraging steel. A causal framework linking microstructure formation, tensile behavior, and JC calibration is established. Methodologically, this review proposes a new anisotropy classification taxonomy — texture-precipitate coupling type (IN718), grain boundary-texture type (TC4), and phase distribution-thermal history type (18Ni300) — and builds a cross-material three-tier error priority framework quantifying state-jump error, anisotropy error, and model calibration error. Key findings are: (i) classical JC models exhibit systematic prediction errors of 10-30% for WAAM materials at high strain rates (>1000 s-1) and elevated temperatures (>600 degrees C); (ii) for WAAM IN718, the state-jump error (~42%) far exceeds the anisotropy error (~14%) and model error (

Zitieren

APA

Liu, X. (2026). A Critical Review on Tensile Behavior and Johnson-CookConstitutive Model Calibration of Wire Arc Additive Manufactured Materials. X-Disciplinarity, 2(2), 3. https://doi.org/10.63174/xdi.bepo1073

Vancouver

Liu X. A Critical Review on Tensile Behavior and Johnson-CookConstitutive Model Calibration of Wire Arc Additive Manufactured Materials. X-Disciplinarity. 2026;2(2):3. doi:10.63174/xdi.bepo1073

BibTeX
@article{Liu2026,
  author = {Liu, Xin},
  title = {A Critical Review on Tensile Behavior and Johnson-CookConstitutive Model Calibration of Wire Arc Additive Manufactured Materials},
  journal = {X-Disciplinarity},
  year = {2026},
  volume = {2},
  number = {2},
  pages = {3},
  doi = {10.63174/xdi.bepo1073}
}
Kostenlos starten →