EUVIMEDEUVIMED entdecken
Crossref

Creation and Calibration of Hydraulic Model for Leakage Management in Water Distribution Systems

Furkan Boztaş, Mahmut Fırat

Journal of Studies in Advanced Technologies · 2024

DOI: 10.63063/jsat.1571651 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Studies in Advanced Technologies, 2024. Verfasst von Furkan Boztaş und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Leaks occur at different rates in water distribution systems (WDSs). Network characteristics, high pressure, environmental factors and operational factors are effective on leaks. Field detection and monitoring activities should be implemented to reduce the volume of leaks resulting from faults in the WDS. The aim of this study is to create and calibrate the district metered area (DMA) based hydraulic model to understand the network behavior and monitor the hydraulic components. The hydraulic model is based on consumption data, network topology, characteristics and pipe roughness information. Calibration should be performed by comparing the pressures obtained from the model with the pressures measured in the field in order to apply the model in leakage management. Incomplete or incorrect network information may cause the difference between these two pressures to be large. In particular, basic data such as incomplete creation of the network topology, incomplete or incorrect acquisition of roughness and consumption information are effective in not providing model calibration. In the calibrated hydraulic model, it is possible to detect and prevent potential leaks by monitoring pressure changes at the nodes. It is thought that the results obtained in this study will constitute a reference in leakage management and hydraulic analysis.

Zitieren

APA

Boztaş, F., & Fırat, M. (2024). Creation and Calibration of Hydraulic Model for Leakage Management in Water Distribution Systems. Journal of Studies in Advanced Technologies. https://doi.org/10.63063/jsat.1571651

Vancouver

Boztaş F, Fırat M. Creation and Calibration of Hydraulic Model for Leakage Management in Water Distribution Systems. Journal of Studies in Advanced Technologies. 2024. doi:10.63063/jsat.1571651

BibTeX
@article{Bozta2024,
  author = {Boztaş, Furkan and Fırat, Mahmut},
  title = {Creation and Calibration of Hydraulic Model for Leakage Management in Water Distribution Systems},
  journal = {Journal of Studies in Advanced Technologies},
  year = {2024},
  doi = {10.63063/jsat.1571651}
}
Kostenlos starten →