Strength Coefficients for Eccentrically Loaded Weld Groups
Engineering Journal · 2025
DOI: 10.62913/engj.v62i1.1337 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering Journal, 2025. Verfasst von Bo Dowswell.
Abstract (Originalsprache)
When AISC Manual Tables 8-4 through 8-11 are used to calculate the strength of eccentrically loaded weld groups with FEXX ≠ 70 ksi, the values are multiplied by an electrode strength coefficient, C1. The C1 values are dependent on the filler metal classification strength; however, they are not proportional to the filler metal classification strength ratio when FEXX ≥ 80 ksi. To consider the potential effect of reduced ductility, the C1 values include reduction factors of 0.85 and 0.90 for higher-strength welds.To investigate the accuracy of the electrode strength coefficients, the ductility of high-strength welds was evaluated using the data from 93 experimental tests from three existing research projects with FEXX > 70 ksi. The data was used to plot the weld metal tensile strength versus the normalized rupture deformation of both longitudinal and transverse fillet welds. The analysis showed that, when FEXX ≤ 120 ksi, the C1 values can be based solely on the filler metal classification strength ratio, FEXX/70 ksi, without the reduction factors of 0.85 and 0.90 for higher-strength welds.
Zitieren
APA
Dowswell, B. (2025). Strength Coefficients for Eccentrically Loaded Weld Groups. Engineering Journal. https://doi.org/10.62913/engj.v62i1.1337
Vancouver
Dowswell B. Strength Coefficients for Eccentrically Loaded Weld Groups. Engineering Journal. 2025. doi:10.62913/engj.v62i1.1337
BibTeX
@article{Dowswell2025,
author = {Dowswell, Bo},
title = {Strength Coefficients for Eccentrically Loaded Weld Groups},
journal = {Engineering Journal},
year = {2025},
doi = {10.62913/engj.v62i1.1337}
}
EUVIMED