EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Core Material Manufacturing Study On Aluminum Composite Panel (ACP)

Prantasi Harmi Tjahjanti, A'rasy Fahruddin, Mulyadi Mulyadi, Septia Hardy Sujiatanti, Majdi Eryandrie Wicaksono, Ribangun Bamban Jakaria

Jurnal Improsci · 28.12.2024 · 2 (3) · 186-196

DOI: 10.62885/improsci.v2i3.579 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Improsci, online erschienen am 28.12.2024. Verfasst von Prantasi Harmi Tjahjanti und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An aluminum composite panel (ACP) is a flat panel with aluminum plates/sheets that are rigid and strong but relatively lightweight. Between the two plates, the core material content is generally made of polyethylene and polyurethane. However, the two core materials are not resistant to high temperatures/heat. They are flammable, so it is urgent to make variations of other core materials resistant to high temperatures. This study aims to provide variations for ACP core materials using polymer materials resistant to high temperatures, namely Low-Density polyethylene (LDPE) and Polyoxymethylene (POM). The method used is experimental/fabrication of ACP making. The high-temperature test was carried out in a furnace with a temperature of 3000C, 3500C, and 4000C, each with a holding time of 1 hour. The results obtained from observing the microstructure using an Optical Microscope before and after the test damaged the core material while the Aluminum metal was still intact. The mass of ACP before and after testing also changed. Overall, at the three temperatures above, the LDPE core material does not withstand this temperature because the temperature is above the melting point of the LDPE material.

Zitieren

APA

Tjahjanti, P. H., Fahruddin, A., Mulyadi, M., Sujiatanti, S. H., Wicaksono, M. E., & Jakaria, R. B. (2024). Core Material Manufacturing Study On Aluminum Composite Panel (ACP). Jurnal Improsci, 2(3), 186-196. https://doi.org/10.62885/improsci.v2i3.579

Vancouver

Tjahjanti PH, Fahruddin A, Mulyadi M, Sujiatanti SH, Wicaksono ME, Jakaria RB. Core Material Manufacturing Study On Aluminum Composite Panel (ACP). Jurnal Improsci. 2024;2(3):186-196. doi:10.62885/improsci.v2i3.579

BibTeX
@article{Tjahjanti2024,
  author = {Tjahjanti, Prantasi Harmi and Fahruddin, A'rasy and Mulyadi, Mulyadi and Sujiatanti, Septia Hardy and Wicaksono, Majdi Eryandrie and Jakaria, Ribangun Bamban},
  title = {Core Material Manufacturing Study On Aluminum Composite Panel (ACP)},
  journal = {Jurnal Improsci},
  year = {2024},
  volume = {2},
  number = {3},
  pages = {186--196},
  doi = {10.62885/improsci.v2i3.579}
}
Kostenlos starten →