EUVIMEDEUVIMED entdecken
Crossref

CONSTRUCTING A ROBOT BASE FRAME CAPABLE OF BALANCING ITS CENTER OF GRAVITY

Dang Viet

Journal of the Technical University of Gabrovo · 30.06.2026 · 72 (1) · 48-52

DOI: 10.62853/pcne4711 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Technical University of Gabrovo, online erschienen am 30.06.2026. Verfasst von Dang Viet.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the design and experimental validation of a compact robot base frame capable of actively balancing its center of gravity through linear mass redistribution. The system employs a lead-screw-driven sliding counterweight actuated by a NEMA 17 stepper motor and regulated by a real-time proportional controller with hysteresis-based state logic. An analytical moment-balance model establishes the relationship between counterweight mass and maximum compensable load, demonstrating that the balancing capacity is approximately 69% of the counterweight mass under the given geometric constraints. Controller tuning shows that a pure proportional gain 40Kp achieves a settling time of approximately 16 s with zero overshoot. Experimental multi-load disturbance tests confirm stable bidirectional compensation, accurate load detection within 100 ms, and effective suppression of hunting behavior through a ±100 g deadzone and a 20 g hysteresis band. The results demonstrate that a mechanically simple, single-degree-of-freedom translational mechanism can provide reliable and repeatable mass-based stabilization for compact robotic platforms.

Zitieren

APA

Viet, D. (2026). CONSTRUCTING A ROBOT BASE FRAME CAPABLE OF BALANCING ITS CENTER OF GRAVITY. Journal of the Technical University of Gabrovo, 72(1), 48-52. https://doi.org/10.62853/pcne4711

Vancouver

Viet D. CONSTRUCTING A ROBOT BASE FRAME CAPABLE OF BALANCING ITS CENTER OF GRAVITY. Journal of the Technical University of Gabrovo. 2026;72(1):48-52. doi:10.62853/pcne4711

BibTeX
@article{Viet2026,
  author = {Viet, Dang},
  title = {CONSTRUCTING A ROBOT BASE FRAME CAPABLE OF BALANCING ITS CENTER OF GRAVITY},
  journal = {Journal of the Technical University of Gabrovo},
  year = {2026},
  volume = {72},
  number = {1},
  pages = {48--52},
  doi = {10.62853/pcne4711}
}
Kostenlos starten →