Penetration depth in laser marking of composite materials with textile reinforcement phase
Journal of the Technical University of Gabrovo · 2025
DOI: 10.62853/ayzz6684 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the Technical University of Gabrovo, 2025. Verfasst von Simeon Tsenkulovski.
Abstract (Originalsprache)
This publication investigates the influence of the technological parameters of the laser marking process on the penetration depth of the laser beam in composite materials based on phenolic laminate with a textile reinforcing phase. Studies was conducted at the output power of the laser radiation - P=5÷50 W, marking speed - V=50mm/s and pulse frequency - f=50Hz. A graphical dependence of the obtained experimental results in comparison with the theoretical values is presented.
Zitieren
APA
Tsenkulovski, S. (2025). Penetration depth in laser marking of composite materials with textile reinforcement phase. Journal of the Technical University of Gabrovo. https://doi.org/10.62853/ayzz6684
Vancouver
Tsenkulovski S. Penetration depth in laser marking of composite materials with textile reinforcement phase. Journal of the Technical University of Gabrovo. 2025. doi:10.62853/ayzz6684
BibTeX
@article{Tsenkulovski2025,
author = {Tsenkulovski, Simeon},
title = {Penetration depth in laser marking of composite materials with textile reinforcement phase},
journal = {Journal of the Technical University of Gabrovo},
year = {2025},
doi = {10.62853/ayzz6684}
}
EUVIMED