EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Solidification Process Investigation of LiCl Salt as PCM with Temperature-Dependent Density and Viscosity by Enthalpy Porosity Simulation Model

Nur Syah Ibrahim, Alief Avicenna Luthfie

Journal of Power, Energy, and Control · 2025

DOI: 10.62777/pec.v2i1.42 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Power, Energy, and Control, 2025. Verfasst von Nur Syah Ibrahim und 1 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An enthalpy porosity simulation model is widely used to simulate the solidification process of a Phase Change Material (PCM) with constant density and viscosity. Consequently, numerical inaccuracy may arise in the investigation of the solidification process. Therefore, this study investigates the solidification of lithium chloride (LiCl) as a PCM, incorporating temperature-dependent density and viscosity in the enthalpy porosity model. Furthermore, the computational domain is represented by a concentric pipe, with the LiCl salt assumed to be fully filled within the annulus. The boundary conditions are adiabatic on the outer radius and constant temperature on the inner radius, representing the temperature of the Heat Transfer Fluid (HTF). The simulation results show that the solidification process with temperature-dependent density and viscosity required a total time of 2360 s to complete the solidification process. In addition, the solidification rate is decreased at the beginning of the solidification process and then increased before being decreased at the end of the solidification process. Furthermore, a comparison is conducted with constant density and viscosity. The comparison result shows that the solidification time of temperature-dependent density and viscosity is shorter than the solidification process time of constant density and viscosity with a deviation of 8.5%, indicating the importance of using the temperature-dependent density and viscosity to investigate the solidification time. Conversely, the solidification rate shows a similar tendency, indicating the insignificant effect of using the temperature-dependent density and viscosity to investigate the solidification rate.

Zitieren

APA

Ibrahim, N. S., & Luthfie, A. A. (2025). Solidification Process Investigation of LiCl Salt as PCM with Temperature-Dependent Density and Viscosity by Enthalpy Porosity Simulation Model. Journal of Power, Energy, and Control. https://doi.org/10.62777/pec.v2i1.42

Vancouver

Ibrahim NS, Luthfie AA. Solidification Process Investigation of LiCl Salt as PCM with Temperature-Dependent Density and Viscosity by Enthalpy Porosity Simulation Model. Journal of Power, Energy, and Control. 2025. doi:10.62777/pec.v2i1.42

BibTeX
@article{Ibrahim2025,
  author = {Ibrahim, Nur Syah and Luthfie, Alief Avicenna},
  title = {Solidification Process Investigation of LiCl Salt as PCM with Temperature-Dependent Density and Viscosity by Enthalpy Porosity Simulation Model},
  journal = {Journal of Power, Energy, and Control},
  year = {2025},
  doi = {10.62777/pec.v2i1.42}
}
Kostenlos starten →