EUVIMEDEUVIMED entdecken
Crossref

Analytical Kinematic Modeling and Simulation Verification of a Three-Link Planar Manipulator

Nuoyu Jiang

ICCK Transactions on Intelligent Cyber-Physical Systems · 2026

DOI: 10.62762/ticps.2026.746937 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ICCK Transactions on Intelligent Cyber-Physical Systems, 2026. Verfasst von Nuoyu Jiang. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper establishes an analytical kinematic model for a three-degree-of-freedom planar manipulator with three serial links, and validates it through MATLAB numerical simulations and SolidWorks-ADAMS co-simulation. Based on the mechanism topology and the Denavit-Hartenberg (D-H) parameter method, coordinate frames are assigned, and homogeneous transformation modeling is performed, leading to a closed-form forward kinematics expression for the end-effector pose. By combining wrist-point decomposition, geometric approaches, and the law of cosines, an analytical inverse kinematics solution is derived, and the characteristics of multiple solution configurations are discussed. The simulation results show that the analytical forward and inverse kinematics are consistent with the numerical outputs from the Robotics Toolbox, and the inverse solution can reliably recover the joint angles. In the ADAMS simulation, joint responses follow a sinusoidal driving law, and the end-effector trajectory is continuous and smooth, satisfying the motion characteristics of planar mechanisms. These results confirm the correctness and engineering applicability of the proposed model.

Zitieren

APA

Jiang, N. (2026). Analytical Kinematic Modeling and Simulation Verification of a Three-Link Planar Manipulator. ICCK Transactions on Intelligent Cyber-Physical Systems. https://doi.org/10.62762/ticps.2026.746937

Vancouver

Jiang N. Analytical Kinematic Modeling and Simulation Verification of a Three-Link Planar Manipulator. ICCK Transactions on Intelligent Cyber-Physical Systems. 2026. doi:10.62762/ticps.2026.746937

BibTeX
@article{Jiang2026,
  author = {Jiang, Nuoyu},
  title = {Analytical Kinematic Modeling and Simulation Verification of a Three-Link Planar Manipulator},
  journal = {ICCK Transactions on Intelligent Cyber-Physical Systems},
  year = {2026},
  doi = {10.62762/ticps.2026.746937}
}
Kostenlos starten →