EUVIMEDEUVIMED entdecken
Crossref

Mitigating Barite Sag and Enhancing HPHT Performance of Oil-Based Drilling Fluids Using Micronized Saudi Calcium Carbonate

Salem Basfar, Ahmed Gowida, Salaheldin Elkatatny

Journal of Geo-Energy and Environment · 20.11.2026 · 3 (2) · 92-104

DOI: 10.62762/jgee.2026.727328 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Geo-Energy and Environment, online erschienen am 20.11.2026. Verfasst von Salem Basfar und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Barite sag and filtration control remain important challenges in oil-based drilling fluids used under high-pressure, high-temperature (HPHT) conditions. This study evaluates micronized calcium carbonate (Mic-Cal), prepared from limestone collected from the Aruma Formation in Saudi Arabia, as an additive for improving the stability and performance of an invert-emulsion oil-based drilling fluid. The Mic-Cal was characterized using particle-size distribution, X-ray fluorescence, X-ray diffraction, and scanning electron microscopy. Formulations containing 10, 20, and 30 lb/bbl Mic-Cal were evaluated after hot rolling at 350\,°F (177\,°C) for 16 h through static sag, density, and electrical stability tests, and the 20 and 30 lb/bbl formulations were further evaluated through HPHT filtration, rheology, and gel-strength tests. The material was predominantly micron-sized, with D50 and D90 values of 2.80 and 10.63 µm, respectively. At 20 lb/bbl, Mic-Cal reduced the static sag factor from 0.55 and 0.58 for the base fluid under vertical and 45° inclined conditions, respectively, to 0.52 under both conditions. The same dosage increased mud density from 14.0 to 14.3 ppg, while electrical stability remained above 400 V after thermal aging, indicating acceptable emulsion stability and solids oil-wetting. Compared with the base fluid, the 20 lb/bbl formulation increased apparent viscosity and yield point by approximately 20% and 56%, respectively, and reduced HPHT filtrate volume and filter-cake thickness by 11% and 33%. Increasing the Mic-Cal concentration to 30 lb/bbl did not provide further improvement in filtration or rheological performance. Under the tested conditions, 20 lb/bbl Mic-Cal provided the most favorable balance between sag mitigation, rheology, and filtration control.

Zitieren

APA

Basfar, S., Gowida, A., & Elkatatny, S. (2026). Mitigating Barite Sag and Enhancing HPHT Performance of Oil-Based Drilling Fluids Using Micronized Saudi Calcium Carbonate. Journal of Geo-Energy and Environment, 3(2), 92-104. https://doi.org/10.62762/jgee.2026.727328

Vancouver

Basfar S, Gowida A, Elkatatny S. Mitigating Barite Sag and Enhancing HPHT Performance of Oil-Based Drilling Fluids Using Micronized Saudi Calcium Carbonate. Journal of Geo-Energy and Environment. 2026;3(2):92-104. doi:10.62762/jgee.2026.727328

BibTeX
@article{Basfar2026,
  author = {Basfar, Salem and Gowida, Ahmed and Elkatatny, Salaheldin},
  title = {Mitigating Barite Sag and Enhancing HPHT Performance of Oil-Based Drilling Fluids Using Micronized Saudi Calcium Carbonate},
  journal = {Journal of Geo-Energy and Environment},
  year = {2026},
  volume = {3},
  number = {2},
  pages = {92--104},
  doi = {10.62762/jgee.2026.727328}
}
Kostenlos starten →