EUVIMEDEUVIMED entdecken
Crossref

High-Loading Waste-Derived Fillers in Poly (Vinylidene Fluoride) Composites: Comparative Effects of Alum Sludge and Wood Dust on Mechanical, Thermal and Dielectric Properties

Elsa Lasseuguette, Alperen Hamit Doger, Reza Salehiyan, Dongyang Sun

Journal of Advanced Electronic Materials · 29.03.2026 · 2 (1) · 25-37

DOI: 10.62762/jaem.2026.709014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Electronic Materials, online erschienen am 29.03.2026. Verfasst von Elsa Lasseuguette und 3 weiteren Autor:innen. Gefördert von: Edinburgh Napier University Research Funding.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly (vinylidene fluoride) (PVDF) composites with high loadings (50-65 wt%) of waste-derived fillers—alum sludge (AS), an inorganic water treatment residue, and wood dust (WD), a lignocellulosic timber by-product—were prepared via melt compounding and compression moulding without compatibilisers. Mechanical, thermal, and dielectric properties were systematically characterised. Increasing filler loading enhanced Young’s modulus but reduced elongation and impact resistance due to restricted chain mobility and stress concentration. Dielectric behaviour differed markedly between the two systems: AS composites exhibited progressive increases in relative permittivity (up to ~70%) attributed to interfacial polarisation, whereas WD composites showed only modest changes due to the low dielectric contrast of lignocellulosic fillers. Differential scanning calorimetry revealed reduced PVDF crystallinity in composites, indicating hindered crystal formation at high filler concentrations. Overall, PVDF can accommodate substantial waste-derived filler fractions while maintaining processability and functional dielectric performance, offering a sustainable pathway for valorising industrial and biomass residues in dielectric materials.

Förderung

  • Edinburgh Napier University Research Funding

Zitieren

APA

Lasseuguette, E., Doger, A. H., Salehiyan, R., & Sun, D. (2026). High-Loading Waste-Derived Fillers in Poly (Vinylidene Fluoride) Composites: Comparative Effects of Alum Sludge and Wood Dust on Mechanical, Thermal and Dielectric Properties. Journal of Advanced Electronic Materials, 2(1), 25-37. https://doi.org/10.62762/jaem.2026.709014

Vancouver

Lasseuguette E, Doger AH, Salehiyan R, Sun D. High-Loading Waste-Derived Fillers in Poly (Vinylidene Fluoride) Composites: Comparative Effects of Alum Sludge and Wood Dust on Mechanical, Thermal and Dielectric Properties. Journal of Advanced Electronic Materials. 2026;2(1):25-37. doi:10.62762/jaem.2026.709014

BibTeX
@article{Lasseuguette2026,
  author = {Lasseuguette, Elsa and Doger, Alperen Hamit and Salehiyan, Reza and Sun, Dongyang},
  title = {High-Loading Waste-Derived Fillers in Poly (Vinylidene Fluoride) Composites: Comparative Effects of Alum Sludge and Wood Dust on Mechanical, Thermal and Dielectric Properties},
  journal = {Journal of Advanced Electronic Materials},
  year = {2026},
  volume = {2},
  number = {1},
  pages = {25--37},
  doi = {10.62762/jaem.2026.709014}
}
Kostenlos starten →