EUVIMEDEUVIMED entdecken
Crossref

Embedded Multi-Core Gyro Attitude Data Acquisition System for Aerospace Vehicle Based on ZYNQ Platform

Youguo Liu, Qingguo Jiang

Aerospace Engineering Communications · 01.07.2026 · 1 (3) · 93-99

DOI: 10.62762/aec.2026.284427 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace Engineering Communications, online erschienen am 01.07.2026. Verfasst von Youguo Liu und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aiming at the interrupt storm performance bottleneck existing in high-speed gyro attitude signal acquisition of aerospace vehicles, an embedded heterogeneous multi-core data acquisition system based on Xilinx ZYNQ-7000 SoC is proposed for inertial measurement unit (IMU) gyro signal sampling. On the hardware layer, a sensor data interface IP conforming to AXI4-Stream protocol is designed in programmable logic (PL) to collect high-frequency gyro original signals, and an AXI DMA controller builds a wideband direct peripheral-DDR transmission channel to realize zero-copy data writing, greatly reducing processor resource occupation under continuous inertial attitude sampling. On the software layer, an AMP dual-core bare-metal parallel framework is deployed in the processing system (PS): the main core undertakes real-time DMA scheduling and hardware interrupt response for gyro sampling streams, while the auxiliary core independently completes attitude data packaging and external communication transmission, thoroughly decoupling high-speed inertial signal acquisition and low-rate data interaction. Meanwhile, an inter-core communication (IPC) mechanism with ultra-low 1.5 $\mu$s delay is constructed based on on-chip memory (OCM) and spinlock algorithm to guarantee multi-core consistency of gyro attitude data. Closed-loop hardware-software joint verification shows that the system supports lossless gyro data transmission at 2 MB/s under 500 kSPS high sampling rate with zero packet loss; the channel inherent noise is measured at 2.4 mV, well within the 5 mV specification threshold, which meets the high real-time and high-precision measurement requirements of aerospace vehicle inertial gyro attitude sensing, and verifies the engineering advantages of this heterogeneous multi-core architecture in aerospace inertial measurement.

Zitieren

APA

Liu, Y., & Jiang, Q. (2026). Embedded Multi-Core Gyro Attitude Data Acquisition System for Aerospace Vehicle Based on ZYNQ Platform. Aerospace Engineering Communications, 1(3), 93-99. https://doi.org/10.62762/aec.2026.284427

Vancouver

Liu Y, Jiang Q. Embedded Multi-Core Gyro Attitude Data Acquisition System for Aerospace Vehicle Based on ZYNQ Platform. Aerospace Engineering Communications. 2026;1(3):93-99. doi:10.62762/aec.2026.284427

BibTeX
@article{Liu2026,
  author = {Liu, Youguo and Jiang, Qingguo},
  title = {Embedded Multi-Core Gyro Attitude Data Acquisition System for Aerospace Vehicle Based on ZYNQ Platform},
  journal = {Aerospace Engineering Communications},
  year = {2026},
  volume = {1},
  number = {3},
  pages = {93--99},
  doi = {10.62762/aec.2026.284427}
}
Kostenlos starten →