EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Analysis of Physical Properties of Graphene Oxide with a Change of Treatment in the Modified Hummer Method

Endah Puspita, Marzuki Naibaho, Luh Ayu Melinia, Ramlan, Masno Ginting

Green and Sustainable Membranes · 03.05.2026 · 1 (1) · 1-6

DOI: 10.62755/gsmb.2026.03 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Green and Sustainable Membranes, online erschienen am 03.05.2026. Verfasst von Endah Puspita und 4 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Graphene oxide (GO) is a versatile 2D carbon nanomaterial that underpins a growing class of sustainable functional technologies, from water purification and gas separation membranes to energy storage devices and photocatalysts for environmental remediation. Realising these promises at scale requires GO building blocks that are reproducible, defect-controlled, and produced by synthesis routes with reduced environmental burden. The Modified Hummer method addresses the safety and emissions limitations of the original Hummer procedure — primarily by minimising sodium nitrate usage and lowering the formation of toxic NOx gases — but the resulting GO’s structural and chemical quality still depends on graphite feedstock and processing conditions. Here, the physical properties of GO synthesised from 5-micron commercial graphite using the Modified Hummer method have been analysed. The SEM-EDX results show that GO has thick surface layers due to the bonding of functional groups to the GO surface, and the elements contained in GO consist of C, O, Mg, Al, Si, S, Cl, K, and Fe. The emergence of S and Cl is attributed to the presence of H2SO4 used in the synthesis and HCl used during the GO washing process. Based on the FTIR results, GO produces spectra showing several functional groups, namely O–H, C=O, C=C, C–H and C–O, formed from graphite oxidised using KMnO4, NaNO3 and H2O2. Based on Raman results, GO has a higher D-peak intensity than G-peak intensity, indicating that GO has a high level of crystal lattice defects (amorphous). Based on the UV-Vis results, GO has absorption bands at 247 nm and 300 nm, indicating the presence of π−π* transitions from aromatic C=C and n−π* from C=O bonds. Together, these features — high oxygen content, abundant hydrophilic surface functionalities, and a defect-rich aromatic lattice — make the synthesised GO a suitable building block for fabricating low-energy, water-compatible composite membranes for selective separations and pollutant uptake, supporting the broader transition toward greener membrane technologies.

Zitieren

APA

Puspita, E., Naibaho, M., Melinia, L. A., Ramlan, & Ginting, M. (2026). Preparation and Analysis of Physical Properties of Graphene Oxide with a Change of Treatment in the Modified Hummer Method. Green and Sustainable Membranes, 1(1), 1-6. https://doi.org/10.62755/gsmb.2026.03

Vancouver

Puspita E, Naibaho M, Melinia LA, Ramlan, Ginting M. Preparation and Analysis of Physical Properties of Graphene Oxide with a Change of Treatment in the Modified Hummer Method. Green and Sustainable Membranes. 2026;1(1):1-6. doi:10.62755/gsmb.2026.03

BibTeX
@article{Puspita2026,
  author = {Puspita, Endah and Naibaho, Marzuki and Melinia, Luh Ayu and Ramlan and Ginting, Masno},
  title = {Preparation and Analysis of Physical Properties of Graphene Oxide with a Change of Treatment in the Modified Hummer Method},
  journal = {Green and Sustainable Membranes},
  year = {2026},
  volume = {1},
  number = {1},
  pages = {1--6},
  doi = {10.62755/gsmb.2026.03}
}
Kostenlos starten →