Influence of Molybdenum (Mo) Doping on the Morphology and Photocatalytic Activity of Hydrothermally Synthesized ZnO for Methylene Blue Degradation
Greensusmater · 20.11.2026 · 3 (2)
DOI: 10.62755/gsm.2026.13 ↗Kurz gefasst
Fachartikel in der Zeitschrift Greensusmater, online erschienen am 20.11.2026. Verfasst von Hirzi Alsyamadan und 2 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Zinc oxide (ZnO) is an inexpensive UV-active photocatalyst, but whether high-valent dopants such as Mo6+ enter its lattice during hydrothermal growth, and how they change its activity, remains poorly understood. Herein, molybdenum (Mo)-doped ZnO (2–6 mol% Mo) was synthesized via a urea-assisted hydrothermal route and calcination at 600 °C, and its lattice, morphology, optical absorption and activity were examined on the same samples. The samples were characterized by X-ray diffraction (XRD) with Rietveld refinement, scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and diffuse reflectance spectroscopy (DRS). All samples were single-phase wurtzite ZnO with crystallite sizes of 27–31 nm, and the lattice parameters varied by no more than 0.00015 Å in a and 0.0006 Å in c, indicating limited Mo substitution. However, Mo addition changed the particle morphology from porous nanoplatelet aggregates to dense prismatic particles up to hundreds of micrometers in size. The direct band gap decreased from 3.26 eV for pristine ZnO and Mo2-ZnO to 3.22 and 3.23 eV for Mo4-ZnO and Mo6-ZnO, while all samples absorbed the 254 nm excitation almost completely. Under UV-C irradiation, the apparent pseudo-first-order rate constant of methylene blue (MB) decolorization increased from (21.8 ± 2.5) × 10−3 min−1 for pristine ZnO to (41.0 ± 1.8) × 10−3 min−1 for Mo6-ZnO, whereas Mo2-ZnO performed like pristine ZnO. The activity gain thus coincided with the small band-gap decrease rather than with the lattice or the morphology, which suggests that Mo acts mainly through a small amount of surface species outside the bulk ZnO lattice.
Zitieren
APA
Alsyamadan, H., Siregar, M. Y., & Khan, M. G. I. (2026). Influence of Molybdenum (Mo) Doping on the Morphology and Photocatalytic Activity of Hydrothermally Synthesized ZnO for Methylene Blue Degradation. Greensusmater, 3(2). https://doi.org/10.62755/gsm.2026.13
Vancouver
Alsyamadan H, Siregar MY, Khan MGI. Influence of Molybdenum (Mo) Doping on the Morphology and Photocatalytic Activity of Hydrothermally Synthesized ZnO for Methylene Blue Degradation. Greensusmater. 2026;3(2). doi:10.62755/gsm.2026.13
BibTeX
@article{Alsyamadan2026,
author = {Alsyamadan, Hirzi and Siregar, Muhammad Yasin and Khan, Mochammad Ghulam Isaq},
title = {Influence of Molybdenum (Mo) Doping on the Morphology and Photocatalytic Activity of Hydrothermally Synthesized ZnO for Methylene Blue Degradation},
journal = {Greensusmater},
year = {2026},
volume = {3},
number = {2},
doi = {10.62755/gsm.2026.13}
}
EUVIMED