EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Oblique Vertical Component and Dual Anteroposterior Fixation in Sagittal “L”-Shaped High Tibial Osteotomy: Technical Considerations and Biomechanical Reasoning

Eliseo Javier Firman

Annali Italiani di Chirurgia · 24.09.2026 · 97 (10)

DOI: 10.62713/aic.4737 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Annali Italiani di Chirurgia, online erschienen am 24.09.2026. Verfasst von Eliseo Javier Firman. Beteiligte Einrichtung: Facultad de Ciencias Médicas, Pontificia Universidad Católica Argentina "Santa María de los Buenos Aires" (UCA), C1107AFB Buenos Aires, Argentina. Hauptthemen laut MEDLINE: Osteotomy, Tibia. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

AIM: To describe an oblique vertical modification of the sagittal “L”-shaped high tibial osteotomy combined with dual anteroposterior fixation and to present the biomechanical reasoning supporting its potential application.METHODS: A technical note was developed based on the previously described sagittal “L”-shaped high tibial osteotomy (HTO). The proposed modification consists of introducing a slight obliquity (10°–20°) in the vertical osteotomy component posterior to the tibial tubercle while maintaining supplementary parallel anteroposterior fixation. The surgical technique, preoperative planning, indications, and biomechanical reasoning were reviewed and described.RESULTS: The proposed modification was designed to increase the available metaphyseal cancellous contact area without substantially altering the original osteotomy geometry. Based on geometric principles and previously published biomechanical studies evaluating osteotomy configurations, the oblique orientation may theoretically improve contact surface characteristics and facilitate load transfer across the osteotomy interface. Dual anteroposterior fixation is maintained as an adjunct stabilization strategy previously described for this osteotomy configuration.CONCLUSIONS: The oblique vertical modification represents a technical refinement of the sagittal “L”-shaped high tibial osteotomy. Although its proposed biomechanical advantages remain theoretical and require experimental and clinical validation, the modification may provide a useful geometric framework for increasing metaphyseal contact area while preserving the established principles of sagittal alignment control, posterior tibial slope preservation, and maintenance of patellar height.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

OsteotomyTibiaHumansBiomechanical Phenomena

Stichwörter der Autor:innen

anteroposterior fixationhigh tibial osteotomypatellar heightposterior tibial slopetibial tuberclevarus knee

Autor:innen und Institutionen

  • Facultad de Ciencias Médicas, Pontificia Universidad Católica Argentina "Santa María de los Buenos Aires" (UCA), C1107AFB Buenos Aires, Argentina.
  • Instituto Argentino de Diagnóstico y Tratamiento (IADT), C1122 Buenos Aires, Argentina.
  • Grupo Médico Teuos, C1426 Buenos Aires, Argentina.

Zitieren

APA

Firman, E. J. (2026). Oblique Vertical Component and Dual Anteroposterior Fixation in Sagittal “L”-Shaped High Tibial Osteotomy: Technical Considerations and Biomechanical Reasoning. Annali Italiani di Chirurgia, 97(10). https://doi.org/10.62713/aic.4737

Vancouver

Firman EJ. Oblique Vertical Component and Dual Anteroposterior Fixation in Sagittal “L”-Shaped High Tibial Osteotomy: Technical Considerations and Biomechanical Reasoning. Annali Italiani di Chirurgia. 2026;97(10). doi:10.62713/aic.4737

BibTeX
@article{Firman2026,
  author = {Firman, Eliseo Javier},
  title = {Oblique Vertical Component and Dual Anteroposterior Fixation in Sagittal “L”-Shaped High Tibial Osteotomy: Technical Considerations and Biomechanical Reasoning},
  journal = {Annali Italiani di Chirurgia},
  year = {2026},
  volume = {97},
  number = {10},
  doi = {10.62713/aic.4737}
}
Kostenlos starten →