EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Penerapan Catalytic Converter Berbahan Kuningan, Nikel, Dan Karbon Aktif Sebagai Upaya Penurunan Emisi Gas Buang Co Dan Hc Pada Mesin Bensin

Pramudita Putri Audina Winasti, Moch. Aziz Kurniawan, Raka Pratindy, Aat Eska Fahmadi, Riza Phahlevi Marwanto

Jurnal Ragam Pengabdian · 01.06.2026 · 3 (2) · 1316-1329

DOI: 10.62710/q6542y50 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Ragam Pengabdian, online erschienen am 01.06.2026. Verfasst von Pramudita Putri Audina Winasti und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Exhaust emissions from motor vehicles are a leading source of air pollution in urban areas, particularly carbon monoxide (CO) and hydrocarbon (HC) produced by incomplete combustion. This study examines the performance of a catalytic converter constructed from a composite combination of brass, nickel, and activated carbon materials in mitigating CO and HC emission levels produced by a Suzuki Carry Pick Up gasoline-powered vehicle. An experimental approach was used, measuring exhaust emissions before and after catalytic converter installation at five engine speeds—idle, 1500, 2000, 2500, and 3000 rpm—with three repetitions per condition. Measurements were taken using a calibrated gas analyzer at the Cilincing Vehicle Testing Unit, Jakarta. Results demonstrated that the catalytic converter reduced average CO emissions by 48.29%, from 0.343% to 0.177%, and HC emissions by 16.67%, from 152.4 ppm to 126.7 ppm. Higher engine speeds generally yielded lower emission levels, consistent with improved combustion efficiency as the air-fuel ratio (AFR) approached the stoichiometric value of 14.7:1. A temporary increase in emissions at 2500 rpm was attributed to valve overlap and combustion chamber pressure dynamics at mid-range speeds. These results confirm that brass and nickel as catalysts combined with activated carbon as an adsorbent represent an effective and economically accessible alternative to precious metals in catalytic converter fabrication.

Zitieren

APA

Winasti, P. P. A., Kurniawan, M. A., Pratindy, R., Fahmadi, A. E., & Marwanto, R. P. (2026). Penerapan Catalytic Converter Berbahan Kuningan, Nikel, Dan Karbon Aktif Sebagai Upaya Penurunan Emisi Gas Buang Co Dan Hc Pada Mesin Bensin. Jurnal Ragam Pengabdian, 3(2), 1316-1329. https://doi.org/10.62710/q6542y50

Vancouver

Winasti PPA, Kurniawan MA, Pratindy R, Fahmadi AE, Marwanto RP. Penerapan Catalytic Converter Berbahan Kuningan, Nikel, Dan Karbon Aktif Sebagai Upaya Penurunan Emisi Gas Buang Co Dan Hc Pada Mesin Bensin. Jurnal Ragam Pengabdian. 2026;3(2):1316-1329. doi:10.62710/q6542y50

BibTeX
@article{Winasti2026,
  author = {Winasti, Pramudita Putri Audina and Kurniawan, Moch. Aziz and Pratindy, Raka and Fahmadi, Aat Eska and Marwanto, Riza Phahlevi},
  title = {Penerapan Catalytic Converter Berbahan Kuningan, Nikel, Dan Karbon Aktif Sebagai Upaya Penurunan Emisi Gas Buang Co Dan Hc Pada Mesin Bensin},
  journal = {Jurnal Ragam Pengabdian},
  year = {2026},
  volume = {3},
  number = {2},
  pages = {1316--1329},
  doi = {10.62710/q6542y50}
}
Kostenlos starten →