EUVIMEDEUVIMED entdecken
Crossref

Track-scale Anisotropic Thermal Material Model as a Viable Substitution In Selective Laser Melting

Pouria Deldar Masrour, Reza Tangestani, Gholamhossein Farrahi, Étienne Martin, Lang Yuan, Tianyu Zhang

Journal of Design Against Fatigue · 21.10.2023 · 1 (3)

DOI: 10.62676/yengcv51 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Design Against Fatigue, online erschienen am 21.10.2023. Verfasst von Pouria Deldar Masrour und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High temperature gradients and resulting residual stresses are the main sources of defects such as cracks, distortion and fatigue failure is selective laser melting. In this paper, a new material model utilizing anisotropic thermal conduction model and track-scale heat input model is used to predict the melt pool geometry, material state and thermal history during the SLM process of SS316L in a large range of laser parameters. The model takes into consideration both the material state and the issue of phase transition during the track-scale simulation.. The simulated melt pools in the beam-scale and track-scale simulations are compared with experimental measurements in different laser parameters. It is found that the proposed material model is able to maintain accuracy between the beam-scale and track-scale simulations at an average of 5μm regarding melt pool dimensions. Furthermore, It can be inferred that both track-scale and beam-scale models exhibit the capability to provide precise predictions of melt pool geometries when compared to experimental measurements while the former being about 100 times faster than the latter. An average error of 10% was concluded for the material state comparison of the two models while the track-scale model was able to capture the temperature profile and cooling rate accurately in comparison with the beam-scale model.

Zitieren

APA

Masrour, P. D., Tangestani, R., Farrahi, G., Martin, É., Yuan, L., & Zhang, T. (2023). Track-scale Anisotropic Thermal Material Model as a Viable Substitution In Selective Laser Melting. Journal of Design Against Fatigue, 1(3). https://doi.org/10.62676/yengcv51

Vancouver

Masrour PD, Tangestani R, Farrahi G, Martin É, Yuan L, Zhang T. Track-scale Anisotropic Thermal Material Model as a Viable Substitution In Selective Laser Melting. Journal of Design Against Fatigue. 2023;1(3). doi:10.62676/yengcv51

BibTeX
@article{Masrour2023,
  author = {Masrour, Pouria Deldar and Tangestani, Reza and Farrahi, Gholamhossein and Martin, Étienne and Yuan, Lang and Zhang, Tianyu},
  title = {Track-scale Anisotropic Thermal Material Model as a Viable Substitution In Selective Laser Melting},
  journal = {Journal of Design Against Fatigue},
  year = {2023},
  volume = {1},
  number = {3},
  doi = {10.62676/yengcv51}
}
Kostenlos starten →