Heat Treatment of 440C Stainless Steel: Mechanical and Electrochemical Behaviour
Journal of Design Against Fatigue · 09.11.2025 · 3 (2) · 18
DOI: 10.62676/jdaf.2025.3.2.20 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Design Against Fatigue, online erschienen am 09.11.2025. Verfasst von Nikunj Chavda und 2 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben.
Abstract (Originalsprache)
This study aims to evaluate the effects of different heat treatment routes on the microstructure, mechanical properties, corrosion resistance, and tribological performance of 440C stainless steel, with comparative analysis against 416 martensitic stainless steel. Scanning electron microscopy (SEM) was employed to examine microstructural changes, while hardness was measured using standard tests. Corrosion behaviour was assessed through potentiodynamic polarization and open circuit potential (OCP) measurements, tribological performance via pin-on-disk tests, and mechanical properties using plastometry. Three heat treatment routes were investigated: double air tempering at 180°C after austenitising and air quenching, double vacuum tempering at 180°C, and nitrogen tempering at 180°C followed by cryogenic quenching and subsequent nitrogen tempering. Results indicate that all heat treatments significantly improve the mechanical properties of 440C stainless steel compared to untreated and heat-treated 416 stainless steel. Cryogenic treatment notably enhances both hardness and corrosion resistance more effectively than other methods, although its tribological performance under higher loads (15N) is inferior. These findings underscore the importance of tailoring heat treatment strategies to optimize 440C stainless steel for applications requiring high mechanical strength and corrosion resistance.
Zitieren
APA
Chavda, N., Zomorodian, A., & Mahmoudi, A. (2025). Heat Treatment of 440C Stainless Steel: Mechanical and Electrochemical Behaviour. Journal of Design Against Fatigue, 3(2), 18. https://doi.org/10.62676/jdaf.2025.3.2.20
Vancouver
Chavda N, Zomorodian A, Mahmoudi A. Heat Treatment of 440C Stainless Steel: Mechanical and Electrochemical Behaviour. Journal of Design Against Fatigue. 2025;3(2):18. doi:10.62676/jdaf.2025.3.2.20
BibTeX
@article{Chavda2025,
author = {Chavda, Nikunj and Zomorodian, Amir and Mahmoudi, Amirhossein},
title = {Heat Treatment of 440C Stainless Steel: Mechanical and Electrochemical Behaviour},
journal = {Journal of Design Against Fatigue},
year = {2025},
volume = {3},
number = {2},
pages = {18},
doi = {10.62676/jdaf.2025.3.2.20}
}
EUVIMED