Rotating Bending Fatigue Durability of Wrought 304 Stainless Steel: A Comparative Study of Surface-Treated vs. Untreated Specimen
Journal of Design Against Fatigue · 06.11.2024 · 2 (2) · 1-12
DOI: 10.62676/jdaf.2024.2.2.10 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Design Against Fatigue, online erschienen am 06.11.2024. Verfasst von Alireza Behvar und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The rotating bending fatigue test, which is a common durability test for industrial components, was employed in this study to examine the impact of the surface treatment procedure on the material's performance under room temperature. The studied material in this research is a wrought stainless steel (SS) 304 alloy that has undergone a specialized surface treatment to enhance the fatigue properties of this unique material. The fatigue endurance of untreated materials was 405 MPa (65% of untreated specimen’s yield strength) on 5 million runout cycles, while the surface-treated samples exhibited 545 MPa (85% of treated specimen’s yield strength), a significantly greater value compared to the untreated ones (even up to 10 million runout cycles). The experimental results demonstrated that the surface-treated samples exhibited no signs of cracking. Instead, all failures were attributed to plastic bending, particularly at higher stress levels. Furthermore, the samples displayed a limited range of stress levels, spanning from endurance to plastic bending conditions. This finding suggests that the hypothesis of an increase in stiffness in the surface layer is more pronounced than in the material interior. It also indicates that the surface layer material was not cracked under the maximum stress level, while the layer beneath it experienced plastic deformation. A comparison has been made between the Basquin equation and a statistical machine learning model (for a limited amount of data) to incorporate the impact of surface treatment on predicting fatigue lifetime, and the random forest regressor model would be able to predict the lifetime with the accuracy of R2= 87% which was much higher than the classical model.
Zitieren
APA
Behvar, A., Scott-Emuakpor, O., James, K., Crannell, B., & Haghshenas, M. (2024). Rotating Bending Fatigue Durability of Wrought 304 Stainless Steel: A Comparative Study of Surface-Treated vs. Untreated Specimen. Journal of Design Against Fatigue, 2(2), 1-12. https://doi.org/10.62676/jdaf.2024.2.2.10
Vancouver
Behvar A, Scott-Emuakpor O, James K, Crannell B, Haghshenas M. Rotating Bending Fatigue Durability of Wrought 304 Stainless Steel: A Comparative Study of Surface-Treated vs. Untreated Specimen. Journal of Design Against Fatigue. 2024;2(2):1-12. doi:10.62676/jdaf.2024.2.2.10
BibTeX
@article{Behvar2024,
author = {Behvar, Alireza and Scott-Emuakpor, Onome and James, Kevin and Crannell, Bradley and Haghshenas, Meysam},
title = {Rotating Bending Fatigue Durability of Wrought 304 Stainless Steel: A Comparative Study of Surface-Treated vs. Untreated Specimen},
journal = {Journal of Design Against Fatigue},
year = {2024},
volume = {2},
number = {2},
pages = {1--12},
doi = {10.62676/jdaf.2024.2.2.10}
}
EUVIMED