EUVIMEDEUVIMED entdecken
Crossref

Application of data mining techniques for assessment of fracture load and energy in double cantilever beam solder joints

Hossein Soroush, Amir Nourani

Journal of Design Against Fatigue · 21.10.2023 · 1 (3)

DOI: 10.62676/9v4azj82 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Design Against Fatigue, online erschienen am 21.10.2023. Verfasst von Hossein Soroush und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Predicting the exact values of fracture load and energy has a significant effect in preventing solder joint failure. In this research, various double cantilever beam (DCB) solder joints with different geometric constraints, including adherend thickness, adherend width, loading arm length, and solder thickness were tested under mode I crack propagation and at a strain rate of 0.03 . According to ANOVA test results, all the mentioned geometric factors influence the fracture load, but adherend width and solder thickness don't change the failure energy remarkably, considering the type I error is equal to 0.05. The failure load and energy forecasting using the random forest algorithm showed that the prediction accuracy is 92% and 81% respectively. Linear regression and lasso regression were also utilized to identify the solder joint's fracture behavior. The coefficient of determination in both methods is acceptable for solder joint fracture force prediction, but for fracture energy, it has decreased to about 70%. Finally, multi-objective optimization was done with the help of the NSGA-II method, and the Pareto front diagram drawn according to the problem's constraints to find the optimal values for fracture force and energy.

Zitieren

APA

Soroush, H., & Nourani, A. (2023). Application of data mining techniques for assessment of fracture load and energy in double cantilever beam solder joints. Journal of Design Against Fatigue, 1(3). https://doi.org/10.62676/9v4azj82

Vancouver

Soroush H, Nourani A. Application of data mining techniques for assessment of fracture load and energy in double cantilever beam solder joints. Journal of Design Against Fatigue. 2023;1(3). doi:10.62676/9v4azj82

BibTeX
@article{Soroush2023,
  author = {Soroush, Hossein and Nourani, Amir},
  title = {Application of data mining techniques for assessment of fracture load and energy in double cantilever beam solder joints},
  journal = {Journal of Design Against Fatigue},
  year = {2023},
  volume = {1},
  number = {3},
  doi = {10.62676/9v4azj82}
}
Kostenlos starten →