EUVIMEDEUVIMED entdecken
Crossref

Oxytetracycline Removal by Ti₃AlC₂ (MAX Phase): Effects of pH, Temperature, Dosage, and Initial Concentration with Kinetic and 60-min Isotherm-Like Analyses

Barbaros Durmuş, Aytekin Celik, Mustafa Yegin, Umay Halisdemir, Neslihan Çanakcı Durmuş

Firat University Journal of Experimental and Computational Engineering · 27.06.2026 · 5 (2) · 382-397

DOI: 10.62520/fujece.1777036 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Firat University Journal of Experimental and Computational Engineering, online erschienen am 27.06.2026. Verfasst von Barbaros Durmuş und 4 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the removal of oxytetracycline (OTC) from aqueous solutions using Ti₃AlC₂ (MAX phase) based on experimental data. The adsorbent was characterized by XRD, SEM, TEM, EDX, and XPS analyses. Batch adsorption experiments were conducted to investigate the effects of pH (2–11), temperature (25–60 °C), adsorbent dosage (0.2–0.5 g per 50 mL), and initial OTC concentration (10–50 mg L⁻¹). The removal efficiency increased with increasing pH and temperature, reaching its highest performance at pH 11 and 60 °C. An adsorbent dosage of 0.2–0.3 g achieved approximately 80–83% OTC removal after 60 min at an initial concentration of 30 mg L⁻¹. While the removal efficiency remained close to 80% with increasing initial concentration, the adsorption capacity increased from 1.93 to 10.31 mg g⁻¹. Kinetic analysis showed that the pseudo-second-order (PSO) model provided a better fit than the pseudo-first-order (PFO) model (R² = 0.915). An isotherm-like evaluation indicated that the Freundlich model showed a slightly better fit than the Langmuir model. Overall, the results demonstrate that alkaline pH and elevated temperature favor OTC removal and that Ti₃AlC₂ MAX phase can achieve high removal efficiency even at low adsorbent dosages, providing a strong basis for process optimization.

Zitieren

APA

Durmuş, B., Celik, A., Yegin, M., Halisdemir, U., & Durmuş, N. Ç. (2026). Oxytetracycline Removal by Ti₃AlC₂ (MAX Phase): Effects of pH, Temperature, Dosage, and Initial Concentration with Kinetic and 60-min Isotherm-Like Analyses. Firat University Journal of Experimental and Computational Engineering, 5(2), 382-397. https://doi.org/10.62520/fujece.1777036

Vancouver

Durmuş B, Celik A, Yegin M, Halisdemir U, Durmuş NÇ. Oxytetracycline Removal by Ti₃AlC₂ (MAX Phase): Effects of pH, Temperature, Dosage, and Initial Concentration with Kinetic and 60-min Isotherm-Like Analyses. Firat University Journal of Experimental and Computational Engineering. 2026;5(2):382-397. doi:10.62520/fujece.1777036

BibTeX
@article{Durmu2026,
  author = {Durmuş, Barbaros and Celik, Aytekin and Yegin, Mustafa and Halisdemir, Umay and Durmuş, Neslihan Çanakcı},
  title = {Oxytetracycline Removal by Ti₃AlC₂ (MAX Phase): Effects of pH, Temperature, Dosage, and Initial Concentration with Kinetic and 60-min Isotherm-Like Analyses},
  journal = {Firat University Journal of Experimental and Computational Engineering},
  year = {2026},
  volume = {5},
  number = {2},
  pages = {382--397},
  doi = {10.62520/fujece.1777036}
}
Kostenlos starten →