Investigation of Deformation Behavior of TC4 Titanium Alloy Bolt in Warm Forming
Journal of Engineering System · 2026-06 · 4 (2) · 71-78
DOI: 10.62517/jes.202602210 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Engineering System, 2026-06. Verfasst von Yufei You und 2 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben.
Abstract (Originalsprache)
TC4 titanium alloy is widely used in the manufacture of high-end aerospace fasteners due to its excellent specific strength and thermal stability. However, during warm forming, it is prone to cracking, uneven filling, and complex microstructure evolution, which restrict forming quality and process stability. This study takes TC4 titanium alloy bolts as the research object to investigate the deformation behavior during warm upsetting. Through Gleeble-3500 thermal simulation experiments, the true stress-strain curves of TC4 material are obtained within the temperature range of 800-1010 ℃ and strain rate range of 0.001-10s-1. Meanwhile, a thermo-mechanical-microstructural coupled finite element model is established based on DEFORM-3D to simulate the metal flow, equivalent stress distribution, equivalent strain distribution, forming load, and temperature field evolution during the three-step warm upsetting process. Based on heat loss analysis, the heat dissipation behavior during multi-station forming is revealed, showing that the billet temperature increases significantly during the forming stage of each step. Forming experiments are carried out on a warm upsetting production line, and the finite element model is validated using a high-precision coordinate measuring machine. The results show that the simulated geometric dimensions of the forged parts are in good agreement with the experimental results, with a relative error of less than 1.5%. The three-step forming process effectively avoids defects caused by a single large deformation, and the metal flow lines are uniformly distributed without obvious distortion or underfilling. The forming load increases stepwise, with a peak load of approximately 219 kN. The numerical model and analysis methods established in this study provide a theoretical basis and engineering reference for the optimization and quality control of the warm forming process of TC4 titanium alloy bolts.
Zitieren
APA
You, Y., Cheng, P., & Shao, C. (2026). Investigation of Deformation Behavior of TC4 Titanium Alloy Bolt in Warm Forming. Journal of Engineering System, 4(2), 71-78. https://doi.org/10.62517/jes.202602210
Vancouver
You Y, Cheng P, Shao C. Investigation of Deformation Behavior of TC4 Titanium Alloy Bolt in Warm Forming. Journal of Engineering System. 2026;4(2):71-78. doi:10.62517/jes.202602210
BibTeX
@article{You2026,
author = {You, Yufei and Cheng, Peng and Shao, Chenxi},
title = {Investigation of Deformation Behavior of TC4 Titanium Alloy Bolt in Warm Forming},
journal = {Journal of Engineering System},
year = {2026},
volume = {4},
number = {2},
pages = {71--78},
doi = {10.62517/jes.202602210}
}
EUVIMED