EUVIMEDEUVIMED entdecken
Crossref

Finite Element Analysis and Experimental Research on the Crushing Blade of Corn Straw Returning and Land Preparation Machine

Qingwei Liu, Ziwen Tong, Changxi Liu, Fucheng Wang, Jun Hu

Journal of Engineering System · 2026-06 · 4 (2) · 37-43

DOI: 10.62517/jes.202602206 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering System, 2026-06. Verfasst von Qingwei Liu und 4 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In response to the problems such as severe wear of the cutting tools, poor uniformity of the crushing process, and excessive energy consumption in the operation of corn straw returning in the northeastern black soil region, this paper designs a 7-shaped crushing blade. Based on the composite failure mechanism of straw shearing and bending, the key structural parameters of the tool were optimized and a three-dimensional model was established. The static finite element analysis of the tool was conducted using ANSYS Workbench. The stress, strain and deformation distribution patterns of the tool were systematically studied. The crushing performance and operational stability of the tool were evaluated through field experiments. The results showed that the maximum equivalent stress of the tool is 204.9 MPa, and the maximum equivalent strain is 9.96×10-4. Both are concentrated at the edge of the installation hole and the adjacent area of the bending transition section. The maximum total deformation is 0.936 mm, located at the free end of the cutting working section, meeting the structural strength and stiffness requirements of agricultural machinery. In the field experiments, the average qualified rate of straw crushing was 91.5%, demonstrating good stability and consistency. This research provides a theoretical basis and engineering reference for the optimization design of the tool structure of the corn straw returning equipment and the improvement of the overall performance of the machine.

Zitieren

APA

Liu, Q., Tong, Z., Liu, C., Wang, F., & Hu, J. (2026). Finite Element Analysis and Experimental Research on the Crushing Blade of Corn Straw Returning and Land Preparation Machine. Journal of Engineering System, 4(2), 37-43. https://doi.org/10.62517/jes.202602206

Vancouver

Liu Q, Tong Z, Liu C, Wang F, Hu J. Finite Element Analysis and Experimental Research on the Crushing Blade of Corn Straw Returning and Land Preparation Machine. Journal of Engineering System. 2026;4(2):37-43. doi:10.62517/jes.202602206

BibTeX
@article{Liu2026,
  author = {Liu, Qingwei and Tong, Ziwen and Liu, Changxi and Wang, Fucheng and Hu, Jun},
  title = {Finite Element Analysis and Experimental Research on the Crushing Blade of Corn Straw Returning and Land Preparation Machine},
  journal = {Journal of Engineering System},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {37--43},
  doi = {10.62517/jes.202602206}
}
Kostenlos starten →