EUVIMEDEUVIMED entdecken
Crossref

Continuous Attitude Measurement and Digital Twin Modeling of High-Speed Circular Test Tracks Based on Tightly Coupled RTK-GNSS/IMU

Yu Tang, Lu Peng, Xiaofan Feng, Bin Zhou, Tengchao Huang, Jianshuang Li

Industry Science and Engineering · 2026-07 · 3 (7) · 37-48

DOI: 10.62381/i265705 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industry Science and Engineering, 2026-07. Verfasst von Yu Tang und 5 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To overcome the difficulty of traditional methods in achieving continuous geometric state inspection of curved and transition sections on high-speed circular test tracks in automotive proving grounds, this paper proposes a vehicle-borne continuous kinematic attitude measurement method based on tightly coupled Real-Time Kinematic Global Navigation Satellite System and Inertial Measurement Unit integration. With four circular test tracks at the Beijing Automotive Reliability Standard Proving Ground as a case study, a mean three-axis attitude digital twin model for each track was constructed via adaptive extended Kalman filtering and 0.2 m spatial resampling. The digital twin accurately records the geometric state of each track and can be automatically updated with each inspection, enabling dynamic monitoring of track geometry. Results show that the roll angle amplitudes of the four tracks follow a power-law relationship with the median design speeds, consistent with superelevation design principles. The pitch angle standard deviation increases from 0.057° on the innermost track to 0.394° on the outermost, indicating stronger longitudinal profile excitation at higher speeds. Complementary International Roughness Index and Riding Quality Index measurements, independently acquired by a laser profilometer, characterize pavement conditions from dimensions beyond the digital twin’s attitude output. Over a total driving time of approximately 15 minutes across the four tracks, the proposed method captured over 72000 valid spatial attitude measurement points, providing a feasible solution for rapid periodic inspection of test track geometric states.

Zitieren

APA

Tang, Y., Peng, L., Feng, X., Zhou, B., Huang, T., & Li, J. (2026). Continuous Attitude Measurement and Digital Twin Modeling of High-Speed Circular Test Tracks Based on Tightly Coupled RTK-GNSS/IMU. Industry Science and Engineering, 3(7), 37-48. https://doi.org/10.62381/i265705

Vancouver

Tang Y, Peng L, Feng X, Zhou B, Huang T, Li J. Continuous Attitude Measurement and Digital Twin Modeling of High-Speed Circular Test Tracks Based on Tightly Coupled RTK-GNSS/IMU. Industry Science and Engineering. 2026;3(7):37-48. doi:10.62381/i265705

BibTeX
@article{Tang2026,
  author = {Tang, Yu and Peng, Lu and Feng, Xiaofan and Zhou, Bin and Huang, Tengchao and Li, Jianshuang},
  title = {Continuous Attitude Measurement and Digital Twin Modeling of High-Speed Circular Test Tracks Based on Tightly Coupled RTK-GNSS/IMU},
  journal = {Industry Science and Engineering},
  year = {2026},
  volume = {3},
  number = {7},
  pages = {37--48},
  doi = {10.62381/i265705}
}
Kostenlos starten →