EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Solvent Extraction of Chromium(III) from Sulphate Medium: A Comprehensive Liquid-Liquid Extraction Study Using Cyanex 302

Aneek Krishna Karmakar, Dilip Kumar Sarkar, Md. Mohaimunul Islam, Anirban Sreemani, Md. Sezan Ali, Md. Zahid Hasan Pilot, Safal Chakma, Eti Rani Pal

Journal of Science and Engineering Papers · 2026

DOI: 10.62275/josep.26.1000026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Science and Engineering Papers, 2026. Verfasst von Aneek Krishna Karmakar und 7 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study focused on the solvent extraction of Cr(III) from sulfate media using Cyanex 302 (bis (2,4,4-trimethylpentyl) monothio-phosphinic acid). Various parameters were systematically evaluated, including phase contact time, initial pH, metal ion concentration, extractant concentration, sulfate ion concentration, temperature, and the type of diluent. Equilibrium was reached within 30 minutes, with the highest extraction efficiency occurring at pH 5.0. Adding more Cyanex 302 improved the extraction efficiency. The study showed that each Cr(III) ion paired with a single dimeric extractant molecule. The presence of sulfate ions was found to hinder extraction by forming non-extractable chromium complexes. The extraction process was endothermic, as indicated by positive enthalpy changes. Among the diluents tested, toluene showed the highest extraction efficiency; however, kerosene was chosen for practical reasons. The maximum loading capacity of Cyanex 302 for Cr(III) was determined to be 2.742 g per 100 g of the extractant. Research found that sulfuric acid was good for stripping, but HCl and HNO3 did not work in the conditions tested. Cyanex 302 had a medium level of extraction efficiency compared to other extractants. These results suggest that Cyanex 302 holds promise for industrial applications in Cr recovery processes, although further optimization may be required to enhance its effectiveness.

Zitieren

APA

Karmakar, A. K., Sarkar, D. K., Islam, M. M., Sreemani, A., Ali, M. S., Pilot, M. Z. H., Chakma, S., & Pal, E. R. (2026). Solvent Extraction of Chromium(III) from Sulphate Medium: A Comprehensive Liquid-Liquid Extraction Study Using Cyanex 302. Journal of Science and Engineering Papers. https://doi.org/10.62275/josep.26.1000026

Vancouver

Karmakar AK, Sarkar DK, Islam MM, Sreemani A, Ali MS, Pilot MZH, et al. Solvent Extraction of Chromium(III) from Sulphate Medium: A Comprehensive Liquid-Liquid Extraction Study Using Cyanex 302. Journal of Science and Engineering Papers. 2026. doi:10.62275/josep.26.1000026

BibTeX
@article{Karmakar2026,
  author = {Karmakar, Aneek Krishna and Sarkar, Dilip Kumar and Islam, Md. Mohaimunul and Sreemani, Anirban and Ali, Md. Sezan and Pilot, Md. Zahid Hasan and Chakma, Safal and Pal, Eti Rani},
  title = {Solvent Extraction of Chromium(III) from Sulphate Medium: A Comprehensive Liquid-Liquid Extraction Study Using Cyanex 302},
  journal = {Journal of Science and Engineering Papers},
  year = {2026},
  doi = {10.62275/josep.26.1000026}
}
Kostenlos starten →