EUVIMEDEUVIMED entdecken
Crossref

IoT-Based Maritime Safety and Boundary Alert System for Small Fishing Vessels

M.Ganesh Kumari, C. Nishkala, R.J. Rajshree, M. Sathana

International Journal of Advanced Research in Science and Technology · 2026 · 15 (10) · 173-177

DOI: 10.62226/ijarst20262872 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Advanced Research in Science and Technology, 2026. Verfasst von M.Ganesh Kumari und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Maritime safety is a significant concern for small fishing vessels, particularly when fishermen operate near predefined or restricted maritime boundaries. The absence of timely boundary-related warnings may cause a vessel to unintentionally approach or cross a designated boundary. Conventional location monitoring can provide geographical information, but an integrated system that interprets the vessel’s location, generates local warnings, and notifies a shore-side contact can provide additional assistance during navigation. To address this requirement, this paper presents an IoT-based Maritime Safety and Boundary Alert System for Small Fishing Vessels using GPS location monitoring, microcontroller-based processing, and GSM communication. The proposed system is developed around an ESP32 microcontroller, a NEO-6M Global Positioning System (GPS) module, a SIM800A Global System for Mobile Communications (GSM) module, an LCD, and a buzzer. The GPS module obtains the vessel’s geographical coordinates in terms of latitude and longitude. These coordinates are supplied to the ESP32, which processes the location information and evaluates the vessel’s distance from a predefined maritime boundary using the configured monitoring logic. The calculated distance and corresponding operating status are displayed on the LCD, enabling the fisherman to observe the vessel’s position relative to the boundary. When the vessel approaches the configured boundary region, the controller activates the buzzer and displays a warning message. When the programmed boundary-crossing condition is detected, the GSM module is used to transmit an SMS notification to a registered mobile number. The project prototype illustrates the operating sequence through GPS initialization messages, GPS-fix status, distance display, proximity warnings, and a boundary-alert message associated with SMS notification. The demonstration outputs include a safe-side distance indication of 5.25 km and warning messages associated with distances of 4 km and 2 km. These values are presented as displayed demonstration outputs rather than as measurements of system accuracy or validated safety thresholds. The block diagram and working-model image illustrate the integration of the principal hardware components, while the LCD outputs provide a visual representation of the monitoring sequence. The proposed design combines location monitoring, local warning, and remote notification in a compact embedded-system prototype intended to support boundary awareness for small fishing vessels.

Zitieren

APA

Kumari, M., Nishkala, C., Rajshree, R., & Sathana, M. (2026). IoT-Based Maritime Safety and Boundary Alert System for Small Fishing Vessels. International Journal of Advanced Research in Science and Technology, 15(10), 173-177. https://doi.org/10.62226/ijarst20262872

Vancouver

Kumari M, Nishkala C, Rajshree R, Sathana M. IoT-Based Maritime Safety and Boundary Alert System for Small Fishing Vessels. International Journal of Advanced Research in Science and Technology. 2026;15(10):173-177. doi:10.62226/ijarst20262872

BibTeX
@article{Kumari2026,
  author = {Kumari, M.Ganesh and Nishkala, C. and Rajshree, R.J. and Sathana, M.},
  title = {IoT-Based Maritime Safety and Boundary Alert System for Small Fishing Vessels},
  journal = {International Journal of Advanced Research in Science and Technology},
  year = {2026},
  volume = {15},
  number = {10},
  pages = {173--177},
  doi = {10.62226/ijarst20262872}
}
Kostenlos starten →