EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

An Integrated Navigation and Obstacle Avoidance Scheme for Indoor Mobile Robots

Shuyuan Wang

International Journal of Mechanical and Electrical Engineering · 30.10.2026 · 8 (7) · 10-23

DOI: 10.62051/ijmee.v8n7.02 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Mechanical and Electrical Engineering, online erschienen am 30.10.2026. Verfasst von Shuyuan Wang. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Indoor mobile robots are expected to reach a goal, build a usable representation of the surrounding space, and avoid obstacles that were never present on any prior map — all simultaneously, and on hardware compact enough to be carried on board the robot. Most published navigation stacks rely on a desktop computer or an embedded Linux board running ROS, which is convenient for research but heavy, power-hungry, and difficult to certify for real-time behavior. This report describes a navigation and obstacle-avoidance scheme that runs in its entirety on a single STM32F407 microcontroller, with no operating system underneath it. The control logic was built using a model-based design (MBD) flow: peripherals were configured in STM32CubeMX, the application layer was modeled in MATLAB/Simulink, and embedded C was generated automatically and flashed to the board. On this platform we layer an extended Kalman filter for pose estimation, an occupancy-grid representation refreshed from a 2-D LiDAR, a grid-based A* planner for the global route, and a dynamic-window (DWA) reactive layer that handles conditions the global map did not anticipate. Switching between plan-following and obstacle avoidance is handled by a supervisory state machine. We ran 150 trials across five indoor scenarios. On average the scheme reached the goal in 92.7% of runs, held localization error under about 0.08 m around a 38 m loop, and still kept a 28% timing margin inside the 20 ms control cycle. Thanks to conditional compilation, the same model runs untouched both in offline simulation and on the physical chip — and this capability, more than any individual algorithm, was central to keeping development tractable.

Zitieren

APA

Wang, S. (2026). An Integrated Navigation and Obstacle Avoidance Scheme for Indoor Mobile Robots. International Journal of Mechanical and Electrical Engineering, 8(7), 10-23. https://doi.org/10.62051/ijmee.v8n7.02

Vancouver

Wang S. An Integrated Navigation and Obstacle Avoidance Scheme for Indoor Mobile Robots. International Journal of Mechanical and Electrical Engineering. 2026;8(7):10-23. doi:10.62051/ijmee.v8n7.02

BibTeX
@article{Wang2026,
  author = {Wang, Shuyuan},
  title = {An Integrated Navigation and Obstacle Avoidance Scheme for Indoor Mobile Robots},
  journal = {International Journal of Mechanical and Electrical Engineering},
  year = {2026},
  volume = {8},
  number = {7},
  pages = {10--23},
  doi = {10.62051/ijmee.v8n7.02}
}
Kostenlos starten →