Study on Material Selection and Thermal Performance of Phase Change Materials for Lithium-Ion Batteries Adapted to Topology-Optimized Fins
International Journal of Mechanical and Electrical Engineering · 20.04.2026 · 8 (4) · 35-43
DOI: 10.62051/ijmee.v8n4.05 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Mechanical and Electrical Engineering, online erschienen am 20.04.2026. Verfasst von Congbin Wu. Die Arbeit nennt 8 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Thermal management of lithium-ion batteries is critical to ensuring their safe and efficient operation. Phase change materials (PCM) and heat transfer enhancement with fins are mainstream technical solutions at present. In this paper, a topology-optimized fin-PCM composite thermal management model is constructed for 2×3 array 18650 lithium-ion batteries. The thermal performance of three PCMs is compared via numerical simulation, and the influences of phase change temperature, latent heat and thermal conductivity on the maximum battery temperature, maximum temperature difference and liquid fraction are analyzed. The results show that PCM 2 achieves the optimal balance among latent heat capacity, phase change temperature and thermal conductivity under 3C and 4C discharge conditions. At the end of discharge, the maximum temperature of PCM 2 is reduced by 2.49% and 6.17% (3C), 8.54% and 6.12% (4C) compared with PCM 1 and PCM 3, respectively. Meanwhile, PCM 2 presents a stable liquid fraction variation and the best thermal buffering effect. This study can provide a reference for material selection and structural design of passive thermal management systems for high-rate lithium-ion batteries.
Zitieren
APA
Wu, C. (2026). Study on Material Selection and Thermal Performance of Phase Change Materials for Lithium-Ion Batteries Adapted to Topology-Optimized Fins. International Journal of Mechanical and Electrical Engineering, 8(4), 35-43. https://doi.org/10.62051/ijmee.v8n4.05
Vancouver
Wu C. Study on Material Selection and Thermal Performance of Phase Change Materials for Lithium-Ion Batteries Adapted to Topology-Optimized Fins. International Journal of Mechanical and Electrical Engineering. 2026;8(4):35-43. doi:10.62051/ijmee.v8n4.05
BibTeX
@article{Wu2026,
author = {Wu, Congbin},
title = {Study on Material Selection and Thermal Performance of Phase Change Materials for Lithium-Ion Batteries Adapted to Topology-Optimized Fins},
journal = {International Journal of Mechanical and Electrical Engineering},
year = {2026},
volume = {8},
number = {4},
pages = {35--43},
doi = {10.62051/ijmee.v8n4.05}
}
EUVIMED