Mechanism of Casing Ovality Deformation in Deep Shale Gas Wells during Hydraulic Fracturing
International Journal of Mechanical and Electrical Engineering · 13.03.2026 · 8 (3) · 67-80
DOI: 10.62051/ijmee.v8n3.09 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Mechanical and Electrical Engineering, online erschienen am 13.03.2026. Verfasst von Pan Fang und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Casing deformation is a major constraint in the efficient development of shale gas horizontal wells during hydraulic fracturing. This study investigates the deformation characteristics and influencing factors in shale gas wells of the Zigong block. A finite element model of the shale–cement sheath–casing system for deep shale gas wells was established based on shale swelling mechanics. Through numerical simulations, the mechanism of casing deformation induced by shale swelling during hydraulic fracturing was determined, and the casing deformation patterns under the combined effects of shale swelling and cementing quality were revealed. Results show that shale swelling significantly increases casing compressive stress and can induce severe deformation. The casing stress distribution along the wellbore axis is strongly affected by the extent of shale hydration. In addition, cement sheath voids and elliptical geometry significantly affect casing stress. Elliptical cement sheaths exacerbate casing elliptical deformation, while cement sheath voids cause localized outward bulging of the casing. The orientation of cementing defects influences the casing's stress and deformation extent. Based on these findings, targeted strategies are proposed to mitigate deformation risks. This study provides new insights into casing failure mechanisms and offers theoretical guidance for fracture design and well integrity management in shale gas reservoirs.
Zitieren
APA
Fang, P., Li, M., Zheng, H., Han, Y., Feng, H., & Hou, Y. (2026). Mechanism of Casing Ovality Deformation in Deep Shale Gas Wells during Hydraulic Fracturing. International Journal of Mechanical and Electrical Engineering, 8(3), 67-80. https://doi.org/10.62051/ijmee.v8n3.09
Vancouver
Fang P, Li M, Zheng H, Han Y, Feng H, Hou Y. Mechanism of Casing Ovality Deformation in Deep Shale Gas Wells during Hydraulic Fracturing. International Journal of Mechanical and Electrical Engineering. 2026;8(3):67-80. doi:10.62051/ijmee.v8n3.09
BibTeX
@article{Fang2026,
author = {Fang, Pan and Li, Maojun and Zheng, Haibo and Han, Yutian and Feng, Hui and Hou, Yongjun},
title = {Mechanism of Casing Ovality Deformation in Deep Shale Gas Wells during Hydraulic Fracturing},
journal = {International Journal of Mechanical and Electrical Engineering},
year = {2026},
volume = {8},
number = {3},
pages = {67--80},
doi = {10.62051/ijmee.v8n3.09}
}
EUVIMED