Thermal Performance Analysis of a Triple-Tube Heat Exchanger with Internal and External Conductive Connections
International Journal of Mechanical and Electrical Engineering · 13.03.2026 · 8 (3) · 56-66
DOI: 10.62051/ijmee.v8n3.08 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Mechanical and Electrical Engineering, online erschienen am 13.03.2026. Verfasst von Kuihua Fu. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Latent heat storage systems are limited by the low thermal conductivity of phase change materials (PCMs), resulting in prolonged charging and discharging times. To address the issues of a single heat conduction path and thermal coupling imbalance in triplex-tube heat exchangers (TTHX), this study proposes an optimized TTHX with internal and external conductive connections. By integrating fins penetrating the tube walls at the bottom of both annular channels, a direct metallic thermal connection node is established, enabling rapid thermal equilibrium between the inner and outer HTFs. Numerical simulation results show that at an inner-to-outer ratio of 0.7, the melting time is reduced by 35.2%; at a ratio of 0.5, the solidification time is 58.9% shorter than that of the novel TTHX at the same ratio and 41.8% shorter than its optimal solidification time. The performance enhancement is attributed to multi-path heat transfer and the full development of two independent natural convection zones. This study achieves a shift from quantitative enhancement to targeted point-specific enhancement, providing new insights for the design of efficient latent heat storage systems.
Zitieren
APA
Fu, K. (2026). Thermal Performance Analysis of a Triple-Tube Heat Exchanger with Internal and External Conductive Connections. International Journal of Mechanical and Electrical Engineering, 8(3), 56-66. https://doi.org/10.62051/ijmee.v8n3.08
Vancouver
Fu K. Thermal Performance Analysis of a Triple-Tube Heat Exchanger with Internal and External Conductive Connections. International Journal of Mechanical and Electrical Engineering. 2026;8(3):56-66. doi:10.62051/ijmee.v8n3.08
BibTeX
@article{Fu2026,
author = {Fu, Kuihua},
title = {Thermal Performance Analysis of a Triple-Tube Heat Exchanger with Internal and External Conductive Connections},
journal = {International Journal of Mechanical and Electrical Engineering},
year = {2026},
volume = {8},
number = {3},
pages = {56--66},
doi = {10.62051/ijmee.v8n3.08}
}
EUVIMED