Physical Characteristics of Seawater as Raw Material for Salt Pond Production in the Padelegan Coastal Area, Pamekasan, Madura
Maritime Park: Journal of Maritime Technology and Society · 04.10.2026 · 458-466
DOI: 10.62012/b6eawz97 ↗Kurz gefasst
Fachartikel in der Zeitschrift Maritime Park: Journal of Maritime Technology and Society, online erschienen am 04.10.2026. Verfasst von Nike Ika Nuzula und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The Padelegan coast of Pamekasan, Madura, is an important source of raw seawater for traditional salt ponds; however, the suitability of this water is strongly affected by spatial variation in physical properties. This study evaluated the physical characteristics of seawater used as salt-pond raw material at 15 stations representing nearshore, estuarine, and offshore waters. Temperature, salinity, brightness, turbidity, and total dissolved solids (TDS) were measured in situ, whereas total suspended solids (TSS), viscosity, density, and specific gravity (SG) were analyzed in the laboratory. Descriptive statistics, Pearson correlation, and spatial visualization were performed in RStudio using R. Salinity ranged from 29.67 to 32.67 ppt, temperature from 27.67 to 31.60 °C, brightness from 0.35 to 0.80 m, turbidity from 0.08 to 64.5 NTU, and density from 1.006147 to 1.008313 g/cm³. Nearshore and estuarine stations generally showed higher turbidity and TSS and lower water transparency, indicating a stronger influence of suspended sediments and land-derived inputs. In contrast, offshore stations showed clearer water and more stable marine characteristics. Brightness was strongly positively correlated with temperature (r = 0.84), while salinity and density showed a moderate positive correlation (r = 0.59) within the observed dataset. These findings indicate that raw seawater intake for salt ponds in Padelegan should prioritize clearer and more stable water sources, while sediment control is required at land-influenced stations to improve salt-pond productivity and raw-material quality.
Zitieren
APA
Nuzula, N. I., Setyawati, D. A., Pratiwi, W. S. W., Kartika, A. G. D., Asih, E. N. N., & Efendy, M. (2026). Physical Characteristics of Seawater as Raw Material for Salt Pond Production in the Padelegan Coastal Area, Pamekasan, Madura. Maritime Park: Journal of Maritime Technology and Society, 458-466. https://doi.org/10.62012/b6eawz97
Vancouver
Nuzula NI, Setyawati DA, Pratiwi WSW, Kartika AGD, Asih ENN, Efendy M. Physical Characteristics of Seawater as Raw Material for Salt Pond Production in the Padelegan Coastal Area, Pamekasan, Madura. Maritime Park: Journal of Maritime Technology and Society. 2026:458-466. doi:10.62012/b6eawz97
BibTeX
@article{Nuzula2026,
author = {Nuzula, Nike Ika and Setyawati, Diah Ayu and Pratiwi, Wiwit Sri Werdi and Kartika, Ary Giri Dwi and Asih, Eka Nurrahema Ning and Efendy, Makhfud},
title = {Physical Characteristics of Seawater as Raw Material for Salt Pond Production in the Padelegan Coastal Area, Pamekasan, Madura},
journal = {Maritime Park: Journal of Maritime Technology and Society},
year = {2026},
pages = {458--466},
doi = {10.62012/b6eawz97}
}
EUVIMED