CFD Analysis of Hydrodynamic Cavitation through an Orifice: Influence of Different Inlet Pressures and Number of Orifice Holes
ASEAN Journal on Science and Technology for Development · 01.01.2025 · 42 (1)
DOI: 10.61931/2224-9028.1603 ↗Kurz gefasst
Fachartikel in der Zeitschrift ASEAN Journal on Science and Technology for Development, online erschienen am 01.01.2025. Verfasst von Lemthong Chanphavong und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref).
Abstract (Originalsprache)
Hydrodynamic cavitation (HC) is considered an energy-efficient process with high potential for utilization in many chemical processes. This study presents a computational fluid dynamics (CFD) analysis of cavitating flow through an orifice with a constant flow area. The Reynolds-Averaged Navier-Stokes (RANS) equations, coupled with turbulence and cavitation models, are employed to capture the complex flow behaviors. The effects of inlet pressures and number of orifice-holes on cavitation behavior are investigated. Result of the numerical simulation is validated with the existing experimental data from the literature. The CFD study revealed that cavitation initiates just behind the inlet edge of the orifice plate. The gas phase then develops and collapses at the downstream location, which resulted from the simultaneous influence of shear stress and turbulence associated with the rapid phase change of the fluid medium. An increase in the upstream pressure is favorable for enlarging the cavitation zone, leading to intensified HC, which effectively decreases the cavitation number. Similarly, an increase in orifice holes while fixing the flow area enables to increase the intensity of HC. The cavitation number decreases from 0.62 (inlet pressure of 500000 Pa/single hole orifice) to 0.34 (inlet pressure of 1000000 Pa), while the cavitation numbers of the 3 and 5 holes are 0.59 and 0.55, respectively. Overall, the cavitation inception is lower than 1.5, which indicates the potential for severe cavitation.
Zitieren
APA
Chanphavong, L., Chanthaboune, V., & Phonhalath, K. (2025). CFD Analysis of Hydrodynamic Cavitation through an Orifice: Influence of Different Inlet Pressures and Number of Orifice Holes. ASEAN Journal on Science and Technology for Development, 42(1). https://doi.org/10.61931/2224-9028.1603
Vancouver
Chanphavong L, Chanthaboune V, Phonhalath K. CFD Analysis of Hydrodynamic Cavitation through an Orifice: Influence of Different Inlet Pressures and Number of Orifice Holes. ASEAN Journal on Science and Technology for Development. 2025;42(1). doi:10.61931/2224-9028.1603
BibTeX
@article{Chanphavong2025,
author = {Chanphavong, Lemthong and Chanthaboune, Vongsavanh and Phonhalath, Keophousone},
title = {CFD Analysis of Hydrodynamic Cavitation through an Orifice: Influence of Different Inlet Pressures and Number of Orifice Holes},
journal = {ASEAN Journal on Science and Technology for Development},
year = {2025},
volume = {42},
number = {1},
doi = {10.61931/2224-9028.1603}
}
EUVIMED