EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Numerical investigations on the effect of frequency on synthetic jet impingement cooling using multiple orifice

S. Vaishnav, R. Leena

Journal of Applied Science, Engineering, Technology and Management · 2023

DOI: 10.61779/jasetm.v1i2.2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Science, Engineering, Technology and Management, 2023. Verfasst von S. Vaishnav und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A synthetic jet generally consists of a cavity with a driver attached on one side and an orifice on the opposite side. When the driver moves back and forth, the jet will generate an unsteady flow through the orifice and the flow will move downstream to a surface forming an impinging flow. When the jet is in the ejection cycle, the diaphragm will expel flow out from the orifice and form a vortex near the orifice. If the propulsion is large enough, the vortex will move downstream before the jet orifice flow reverses and starts to suck in flow. The computational process is carried out using the commercial software ANSYS Fluent. In this study, the heat transfer characteristics of synthetic jet impingement cooling with multiple orifice (1 and 2 orifices) are analyze with different operating frequencies (f=100 Hz to f=500 Hz and f=1 Hz to f=5 Hz) with different Reynolds numbers (Re=10000 and 20000) The results demonstrate that high frequency synthetic jets show better heat removal capacity than lower frequency at the same Reynolds number.

Zitieren

APA

Vaishnav, S., & Leena, R. (2023). Numerical investigations on the effect of frequency on synthetic jet impingement cooling using multiple orifice. Journal of Applied Science, Engineering, Technology and Management. https://doi.org/10.61779/jasetm.v1i2.2

Vancouver

Vaishnav S, Leena R. Numerical investigations on the effect of frequency on synthetic jet impingement cooling using multiple orifice. Journal of Applied Science, Engineering, Technology and Management. 2023. doi:10.61779/jasetm.v1i2.2

BibTeX
@article{Vaishnav2023,
  author = {Vaishnav, S. and Leena, R.},
  title = {Numerical investigations on the effect of frequency on synthetic jet impingement cooling using multiple orifice},
  journal = {Journal of Applied Science, Engineering, Technology and Management},
  year = {2023},
  doi = {10.61779/jasetm.v1i2.2}
}
Kostenlos starten →