EUVIMEDEUVIMED entdecken
Crossref

Využití 3D technologií při restaurování porcelánového servisu zn. Pirkenhammer

Pavla Dvořáková, Mária Kolářová, Otto Wiener, Alexandra Kloužková

Fórum pro konzervátory-restaurátory · 2026

DOI: 10.61574/fkr.2026.2.120 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fórum pro konzervátory-restaurátory, 2026. Verfasst von Pavla Dvořáková und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

USE OF 3D TECHNOLOGIES IN RESTORATION OF PIRKENHA- MMER PORCELAIN SERVICE The paper examines the possibilities of using 3D scanning and 3D printing in the process of restoration of a historical Pirken- hammer porcelain service from the Březová porcelain factory. Part of the restoration was carried out using traditional tech- niques of bonding and filling, followed by retouching, while two missing lids – from the coffee pot and the sugar bowl – were rep- licated using 3D technologies. To produce the replicas, a meth- od based on digital 3D modelling was used, followed by printing the models and testing various methods of surface finishing on the polymer prints. The aim was to achieve an optimal imitation of the appearance of glazed porcelain. For the digitization of the preserved lids, a handheld, non-contact 3D scanner with struc- tured-light Go!SCAN 20 was used. The models were subsequently processed using VXmodel software and made smaller according to the inner diameters of the coffee pot and sugar bowl openings. The replicas were produced on a 3D printer using two methods: fused deposition modeling (FDM) with PLA, ASA, and PETG poly- mer filaments, and stereolithography (SLA) with a photopolymer resin. On all samples, different variants of blasting, sanding, and glaze imitation were tested. The results demonstrated that with an appropriate choice of material and surface treatment, it is pos- sible to achieve visually convincing replacements that respect the requirement for clear legibility of the intervention.

Zitieren

APA

Dvořáková, P., Kolářová, M., Wiener, O., & Kloužková, A. (2026). Využití 3D technologií při restaurování porcelánového servisu zn. Pirkenhammer. Fórum pro konzervátory-restaurátory. https://doi.org/10.61574/fkr.2026.2.120

Vancouver

Dvořáková P, Kolářová M, Wiener O, Kloužková A. Využití 3D technologií při restaurování porcelánového servisu zn. Pirkenhammer. Fórum pro konzervátory-restaurátory. 2026. doi:10.61574/fkr.2026.2.120

BibTeX
@article{Dvokov2026,
  author = {Dvořáková, Pavla and Kolářová, Mária and Wiener, Otto and Kloužková, Alexandra},
  title = {Využití 3D technologií při restaurování porcelánového servisu zn. Pirkenhammer},
  journal = {Fórum pro konzervátory-restaurátory},
  year = {2026},
  doi = {10.61574/fkr.2026.2.120}
}
Kostenlos starten →