EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties of Recycled High-Density Polyethylene, Rice Husk Ash, and Fly Ash Composite Mixture

Omair Nasir, Intan Syaqirah Mohd Zulkifli

Journal of Innovation and Technology · 2022

DOI: 10.61453/joit.v2022no22 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Innovation and Technology, 2022. Verfasst von Omair Nasir und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In today’s world, plastic has become a global environmental issue that needs to be addressed properly. Most of the plastic waste stems from two sources: low-density and high-density polyethylene (HDPE). HDPE has higher mechanical properties in terms of strength, rigidity, and melting point compared to LDPE. As for rice husk ash, it become abundant as a waste material in all rice producing countries. Rice husks ash (RHA) when burnt, releases particulates which are nanometers in size and can decrease air quality but more importantly can cause breathing and eye problems for humans and animals alike. Thus, the increasing interest from researchers using fillers in polymer composites has explored the potential usage of such materials. The objective of the research is to determine the mechanical properties of composite material made from high-density polyethylene (HDPE), rice husk ash (RHA) and fly ash (FA) at different composition ratio. The HDPE, RHA and FA granule is mixed according to different ratio using 3D rotary mixer and then place onto hot press machine to obtain desired shape for the mechanical testing. Four (4) types of composite were tested in this study which were: (i) 100% HDPE, 0% RHA, 0% FA (ii) 90% HDPE, 5% RHA, 5% FA, (iii) 80% HDPE, 10% RHA, 10% FA, and (iv) 70% HDPE, 15% RHA, 15% FA. The results showed that for sample 1, 2, 3 and 4; the maximum stress of 10.506 kN, 8.569 kN, 7.578 kN and 7.485 kN were observed.

Zitieren

APA

Nasir, O., & Zulkifli, I. S. M. (2022). Mechanical Properties of Recycled High-Density Polyethylene, Rice Husk Ash, and Fly Ash Composite Mixture. Journal of Innovation and Technology. https://doi.org/10.61453/joit.v2022no22

Vancouver

Nasir O, Zulkifli ISM. Mechanical Properties of Recycled High-Density Polyethylene, Rice Husk Ash, and Fly Ash Composite Mixture. Journal of Innovation and Technology. 2022. doi:10.61453/joit.v2022no22

BibTeX
@article{Nasir2022,
  author = {Nasir, Omair and Zulkifli, Intan Syaqirah Mohd},
  title = {Mechanical Properties of Recycled High-Density Polyethylene, Rice Husk Ash, and Fly Ash Composite Mixture},
  journal = {Journal of Innovation and Technology},
  year = {2022},
  doi = {10.61453/joit.v2022no22}
}
Kostenlos starten →