Hybrid precursor engineering of g-C₃N₄ toward improved α-Fe₂O₃/g-C₃N₄ photoanodes under HMF hole-scavenging conditions
International Journal of Renewable Energy Development · 01.09.2026 · 15 (5) · 1101-1109
DOI: 10.61435/ijred.2026.62699 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Renewable Energy Development, online erschienen am 01.09.2026. Verfasst von Muhammad Ibadurrohman und 3 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0). Gefördert von: Seed Funding Hibah Lektor Kepala Skema Hibah Riset.
Abstract (Originalsprache)
The sluggish kinetics of Oxygen Evolution Reaction (OER) is a challenge for the development of efficient photoelectrochemical (PEC) systems for sustainable hydrogen production. In this work, α-Fe₂O₃/g-C₃N₄ photoanodes were prepared from g-C₃N₄ of different precursors (urea, melamine and/or dicyandiamide) to investigate the influence of hybrid precursor engineering on the photoelectrochemical properties of the heterostructures. The incorporation of hybrid precursor derived g-C₃N₄ modified the structural and optical properties of the composite photoanodes and resulted in enhanced PEC response compared to single precursor systems. The as prepared composite with g-C₃N₄ prepared from ternary hybrid precursors (urea, melamine and dicyandiamide) showed the best performance among the as prepared samples with lowest onset potential (0.01 V) and highest ΔE (0.88 V) under the present experimental conditions. Photoluminescence analysis indicated a lower emission intensity of the ternary hybrid precursor-derived sample, which was attributed to the inhibited charge carriers recombination. Furthermore, the addition of 5-hydroxymethylfurfural (HMF) as a model organic substrate increased the photocurrent density (~95%) with no change in the onset potential, demonstrating the effective hole scavenging ability of the HMF. Chronopotentiometry measurements confirmed stable operation during continuous illumination. These findings demonstrate that the hybrid precursor engineering of g-C₃N₄ can affect the PEC behavior of α-Fe₂O₃/g-C₃N₄ photoanodes under HMF-assisted conditions.
Förderung
- Seed Funding Hibah Lektor Kepala Skema Hibah Riset
Zitieren
APA
Ibadurrohman, M., Ulibasa, R., Mumtazah, N., & Syahlani, N. (2026). Hybrid precursor engineering of g-C₃N₄ toward improved α-Fe₂O₃/g-C₃N₄ photoanodes under HMF hole-scavenging conditions. International Journal of Renewable Energy Development, 15(5), 1101-1109. https://doi.org/10.61435/ijred.2026.62699
Vancouver
Ibadurrohman M, Ulibasa R, Mumtazah N, Syahlani N. Hybrid precursor engineering of g-C₃N₄ toward improved α-Fe₂O₃/g-C₃N₄ photoanodes under HMF hole-scavenging conditions. International Journal of Renewable Energy Development. 2026;15(5):1101-1109. doi:10.61435/ijred.2026.62699
BibTeX
@article{Ibadurrohman2026,
author = {Ibadurrohman, Muhammad and Ulibasa, Regina and Mumtazah, Nadia and Syahlani, Nurfadlih},
title = {Hybrid precursor engineering of g-C₃N₄ toward improved α-Fe₂O₃/g-C₃N₄ photoanodes under HMF hole-scavenging conditions},
journal = {International Journal of Renewable Energy Development},
year = {2026},
volume = {15},
number = {5},
pages = {1101--1109},
doi = {10.61435/ijred.2026.62699}
}
EUVIMED