EUVIMEDEUVIMED entdecken
Crossref

THEORETICAL SUBSTANTIATION OF THE PARAMETERS OF CUTTING WORKING ELEMENTS OF A COTTON TOPPING APPARATUS FOR COTTON CULTIVATED UNDER INTENSIVE TECHNOLOGY USING A TWIN-ROW PLANTING SCHEME

Shavkat RAVSHANOV, Kobuljon ERMATOV, Dilsabo CHORIEVA, Nigora OQYOLOVA

Machine Science Journal · 30.06.2026 · 26 (1) · 49-60

DOI: 10.61413/aebv1753 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machine Science Journal, online erschienen am 30.06.2025. Verfasst von Shavkat RAVSHANOV und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article presents a theoretical justification of the parameters of the working elements of a cutting apparatus for mechanical cotton topping under intensive cultivation with a 76  double- 10cm row planting scheme. It is shown that under double-row planting, one rotor interacts simultaneously with cotton plants in two rows; therefore, the number of blades, rotational speed, blade-tip speed, spacing of cutting traces, rotor radius, and hydraulic drive power must be determined with regard to the two-row technological load. Based on the analysis of sources, it was established that the diameter of the upper cotton stem in the topping zone mainly ranges from 3,5to 4,8mm , while a range of 4 6mm is reasonable for design calculations with a safety margin. Theoretical calculations showed that at an operating speed of 1,4 1,7m s , a two-blade rotor operating at 450rpm is insufficient for high-quality topping. For a four-blade rotor, the following rational parameters were justified: rotational speed of 600 750rpm , rotor radius of 0,18 0,22m , and blade-tip speed of 11 17m /s.

Zitieren

APA

RAVSHANOV, S., ERMATOV, K., CHORIEVA, D., & OQYOLOVA, N. (2026). THEORETICAL SUBSTANTIATION OF THE PARAMETERS OF CUTTING WORKING ELEMENTS OF A COTTON TOPPING APPARATUS FOR COTTON CULTIVATED UNDER INTENSIVE TECHNOLOGY USING A TWIN-ROW PLANTING SCHEME. Machine Science Journal, 26(1), 49-60. https://doi.org/10.61413/aebv1753

Vancouver

RAVSHANOV S, ERMATOV K, CHORIEVA D, OQYOLOVA N. THEORETICAL SUBSTANTIATION OF THE PARAMETERS OF CUTTING WORKING ELEMENTS OF A COTTON TOPPING APPARATUS FOR COTTON CULTIVATED UNDER INTENSIVE TECHNOLOGY USING A TWIN-ROW PLANTING SCHEME. Machine Science Journal. 2026;26(1):49-60. doi:10.61413/aebv1753

BibTeX
@article{RAVSHANOV2026,
  author = {RAVSHANOV, Shavkat and ERMATOV, Kobuljon and CHORIEVA, Dilsabo and OQYOLOVA, Nigora},
  title = {THEORETICAL SUBSTANTIATION OF THE PARAMETERS OF CUTTING WORKING ELEMENTS OF A COTTON TOPPING APPARATUS FOR COTTON CULTIVATED UNDER INTENSIVE TECHNOLOGY USING A TWIN-ROW PLANTING SCHEME},
  journal = {Machine Science Journal},
  year = {2026},
  volume = {26},
  number = {1},
  pages = {49--60},
  doi = {10.61413/aebv1753}
}
Kostenlos starten →