EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Coupled optical and electrical modeling of TiO2 anti-reflective coatings for enhanced performance in GaAs thin-film solar cells

F. Aungwa, D. S. Igba, A. A. McAsule, M. B. Ochang, W. V. Zhiya, A. I. Tyom

Recent Advances in Natural Sciences · 31.07.2026 · 367

DOI: 10.61298/rans.2026.4.2.367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Recent Advances in Natural Sciences, online erschienen am 31.07.2026. Verfasst von F. Aungwa und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optical reflection losses at the air--semiconductor interface limit the performance of gallium arsenide (GaAs) thin-film solar cells, whereas optical and electrical optimization are often considered separately. This study develops a coupled MATLAB-based optical--electrical simulation framework to evaluate the effect of titanium dioxide (TiO2) anti-reflective coating (ARC) thickness on GaAs thin-film solar cells. The optical response was assessed from wavelength-dependent reflectance, transmittance, absorptance, and quantum efficiency, and electrical performance was evaluated from current density--voltage characteristics, short-circuit current density ( Jsc), open-circuit voltage (Voc), fill factor (FF), and power conversion efficiency (PCE). TiO2 ARC thicknesses of 50, 75, and 100 nm were simulated under AM 1.5G illumination at 300 K. The 50 nm coating produced the lowest reflectance, highest absorptance, highest current density, and highest quantum efficiency across 300--900 nm. It also provided the best overall photovoltaic performance, with Jsc ≈ 34.7 mA cm-2, Voc approx 0.839 V, FF ≈ 0.842, and a maximum PCE of approximately 24.2%. Increasing the coating thickness to 75 and 100~nm reduced the PCE to approximately 22.95% and 21.85%, respectively. The results show that optimum photovoltaic efficiency requires a balanced combination of optical absorption, current generation, voltage, and FF. The coupled framework provides a computationally efficient tool for designing and optimizing ARCs for high-efficiency III--V photovoltaic devices.

Zitieren

APA

Aungwa, F., Igba, D. S., McAsule, A. A., Ochang, M. B., Zhiya, W. V., & Tyom, A. I. (2026). Coupled optical and electrical modeling of TiO2 anti-reflective coatings for enhanced performance in GaAs thin-film solar cells. Recent Advances in Natural Sciences, 367. https://doi.org/10.61298/rans.2026.4.2.367

Vancouver

Aungwa F, Igba DS, McAsule AA, Ochang MB, Zhiya WV, Tyom AI. Coupled optical and electrical modeling of TiO2 anti-reflective coatings for enhanced performance in GaAs thin-film solar cells. Recent Advances in Natural Sciences. 2026:367. doi:10.61298/rans.2026.4.2.367

BibTeX
@article{Aungwa2026,
  author = {Aungwa, F. and Igba, D. S. and McAsule, A. A. and Ochang, M. B. and Zhiya, W. V. and Tyom, A. I.},
  title = {Coupled optical and electrical modeling of TiO2 anti-reflective coatings for enhanced performance in GaAs thin-film solar cells},
  journal = {Recent Advances in Natural Sciences},
  year = {2026},
  pages = {367},
  doi = {10.61298/rans.2026.4.2.367}
}
Kostenlos starten →