EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterizations of some discarded shells particles polymer-based composites for ceilings and particles board applications

Mufutau Abiodun Salawu, Ibrahim K. Ayinla, Mashood A. Salahudeen, Joshua A. Adeoye, Peter T. Jegede, Sabastine C. Ezike, Oluwatoyin O. Olasanmi, Francis O. Omoniyi, Aderemi .B. Alabi

Recent Advances in Natural Sciences · 2023

DOI: 10.61298/rans.2023.1.2.17 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Recent Advances in Natural Sciences, 2023. Verfasst von Mufutau Abiodun Salawu und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sea-shells, periwinkle-shells, and snail-shells were pulverized into 35.5 µm particle sizes. Using a two-roll Rheomixer with a rotor speed of 60 rpm for 10 minutes, the particles were thoroughly mixed with the binders in ratio 2:1 and placed in the compression mold of dimension 15 cm by 3 cm by 3 cm using a force of 1.5 kN. The Rockwell hardness tester on scale B with a 1.56 mm steel ball, optical microscope and Flexural tester were used to characterize the composites. Thermo-gravimetric analyzer and Fourier Transform Infrared (FTIR) Spectrometer were used to characterize the shell particles. According to the results, epoxy resin (bisphenol-A-diglycidyl ether poly) and hardener (isophoromediamine) composites containing periwinkle shell particles had the highest hardness number of 48 and could withstand maximum flexural load of 5.5 MPa ether poly) and hardener (isophoromediamine) proved to be the best epoxy resin. All the shell particleS functional groups were visible in the FTIR analysis with varying transmittances at their respective wavenumbers. Optical micrographs of the composites showed uniform distribution of the reinforcement and the matrix, thermo-gravimetric analyses demonstrated good thermal stability of the shell-particles up to 250 ◦C

Zitieren

APA

Salawu, M. A., Ayinla, I. K., Salahudeen, M. A., Adeoye, J. A., Jegede, P. T., Ezike, S. C., Olasanmi, O. O., Omoniyi, F. O., & Alabi, A. B. (2023). Characterizations of some discarded shells particles polymer-based composites for ceilings and particles board applications. Recent Advances in Natural Sciences. https://doi.org/10.61298/rans.2023.1.2.17

Vancouver

Salawu MA, Ayinla IK, Salahudeen MA, Adeoye JA, Jegede PT, Ezike SC, et al. Characterizations of some discarded shells particles polymer-based composites for ceilings and particles board applications. Recent Advances in Natural Sciences. 2023. doi:10.61298/rans.2023.1.2.17

BibTeX
@article{Salawu2023,
  author = {Salawu, Mufutau Abiodun and Ayinla, Ibrahim K. and Salahudeen, Mashood A. and Adeoye, Joshua A. and Jegede, Peter T. and Ezike, Sabastine C. and Olasanmi, Oluwatoyin O. and Omoniyi, Francis O. and Alabi, Aderemi .B.},
  title = {Characterizations of some discarded shells particles polymer-based composites for ceilings and particles board applications},
  journal = {Recent Advances in Natural Sciences},
  year = {2023},
  doi = {10.61298/rans.2023.1.2.17}
}
Kostenlos starten →