EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Study the effect of changing the length of the triangle leading edge of a flat plate on the separation distance of the flow

Al Rafidain Journal of Engineering Sciences · 2023

DOI: 10.61268/0zneyn22 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Al Rafidain Journal of Engineering Sciences, 2023. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

There are two primary facets of the separated-reattached in this study. Translational flow from a flat plate with a triangle edge in three dimensions, simulated with a huge vortex using the Ansys Fluent CFD simulation. The consistency of the edge is the study's outcome as it looked at how to use an isosceles triangular edge to shorten the flow's separation length. Three different lengths of cases were recorded. We found that the mean length of the reattachment was 4 cm in the first case, where the triangle's edge length was 0.5 cm. We measured the mean length of the reattachment in the second example, where the triangle's edge was 1 cm, and in the third case, when the triangle's edge measured 1.5 cm, we found that the mean length of the reattachment was 1.8 cm. Based on our analysis, the optimal case is the third one. As the edge length increases, the mean reattachment length decreases.

Zitieren

APA

(2023). Study the effect of changing the length of the triangle leading edge of a flat plate on the separation distance of the flow. Al Rafidain Journal of Engineering Sciences. https://doi.org/10.61268/0zneyn22

Vancouver

Study the effect of changing the length of the triangle leading edge of a flat plate on the separation distance of the flow. Al Rafidain Journal of Engineering Sciences. 2023. doi:10.61268/0zneyn22

BibTeX
@article{euvimed2023,
  title = {Study the effect of changing the length of the triangle leading edge of a flat plate on the separation distance of the flow},
  journal = {Al Rafidain Journal of Engineering Sciences},
  year = {2023},
  doi = {10.61268/0zneyn22}
}
Kostenlos starten →