EUVIMEDEUVIMED entdecken
Crossref

Design And Development Of A Step-Type Escalator Miniature Mechanical System With A Gas Spring-Based Chain Tensioning Mechanism

Widya Risti La Ode, Kurniaty Atmia, Bayu Purbo Wartoyo

Micronic: Journal of Multidisciplinary Electrical and Electronics Engineering · 05.09.2026 · 22-30

DOI: 10.61220/micronic.v4i3.69 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micronic: Journal of Multidisciplinary Electrical and Electronics Engineering, online erschienen am 05.09.2026. Verfasst von Widya Risti La Ode und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to design and develop a step-type escalator miniature mechanical system equipped with a gas spring-based chain tensioner to help maintain roller chain condition during operation. The research used a Research and Development (R&D) method with descriptive quantitative analysis. The developed system uses a single-phase 220 V, 100 W, 1400 rpm AC motor, a 14T sprocket, ANSI #40 roller chain, a 20 mm main shaft, UCP204 bearing, a 40 × 40 × 2 mm steel hollow frame, 2 mm steel checker-plate steps, a 150 N compression gas spring with a 50 mm stroke, and an NBR rubber idler sprocket with a size of Ø40 × 60 mm. Functional testing showed that the AC motor, roller chain, sprocket, bearing, steps, chain tensioner, idler sprocket, and gas spring operated properly. At 1060 rpm, the noise level decreased from 79.9 dB before using the chain tensioner to 79.0 dB after application. Temperature testing showed reductions from 33.0 °C to 30.4 °C at 5 minutes, from 39.6 °C to 37.2 °C at 10 minutes, and from 48.8 °C to 46.1 °C at 15 minutes. The chain tensioner test showed that the chain remained tensioned after 5 minutes, no looseness occurred after 10 minutes, the chain remained stable after 15 minutes, and no slip occurred after 20 minutes. These results indicate that the gas spring-based chain tensioner operated according to the design and helped maintain transmission stability. Keywords: escalator, roller chain, chain tensioner, gas spring, idler sprocket

Zitieren

APA

Ode, W. R. L., Atmia, K., & Wartoyo, B. P. (2026). Design And Development Of A Step-Type Escalator Miniature Mechanical System With A Gas Spring-Based Chain Tensioning Mechanism. Micronic: Journal of Multidisciplinary Electrical and Electronics Engineering, 22-30. https://doi.org/10.61220/micronic.v4i3.69

Vancouver

Ode WRL, Atmia K, Wartoyo BP. Design And Development Of A Step-Type Escalator Miniature Mechanical System With A Gas Spring-Based Chain Tensioning Mechanism. Micronic: Journal of Multidisciplinary Electrical and Electronics Engineering. 2026:22-30. doi:10.61220/micronic.v4i3.69

BibTeX
@article{Ode2026,
  author = {Ode, Widya Risti La and Atmia, Kurniaty and Wartoyo, Bayu Purbo},
  title = {Design And Development Of A Step-Type Escalator Miniature Mechanical System With A Gas Spring-Based Chain Tensioning Mechanism},
  journal = {Micronic: Journal of Multidisciplinary Electrical and Electronics Engineering},
  year = {2026},
  pages = {22--30},
  doi = {10.61220/micronic.v4i3.69}
}
Kostenlos starten →