EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Produksi Ring Baut Diameter 16 x 4 mm Kepala Silinder, Bahan SS308, Kapasitas 12 Biji/Jam

Fitrah Bisma Taimullah Al Jahfal, Syamsul Hadi, Muhammad Farhad Sholeh, Abdullah Hakim Ubaidillah, Muhammad Bintang Ramadhan Sukamto

Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika · 17.06.2026 · 4 (3) · 108-121

DOI: 10.61132/jupiter.v4i3.1393 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika, online erschienen am 17.06.2026. Verfasst von Fitrah Bisma Taimullah Al Jahfal und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bolt ring diameter 16 x 4 mm cylinder head, SS308 material on the cylinder head of a 250 cm³ motorcycle in 2013 is no longer produced by the factory, so its availability in the market is limited and difficult to obtain as a problem faced. The production objective is to obtain a bolt ring diameter 16 x 4 mm cylinder head, SS308 material on the cylinder head of a 250 cm³ motorcycle with a surface smoothness level of N7 in accordance with the standard component specifications. The production method includes: component design according to standards, selection of SS308 material with a diameter of 19.05 mm and a length of 1 m, turning to a diameter of 16 mm and a length of 200 mm, drilling with a diameter of 8 mm using a loose head to a depth of 50 mm, surface smoothing to a smoothness level of N7, cutting the material into 4 mm thick rings, and quality and dimension inspection. The production results are in the form of a bolt ring with an outer diameter of 16 mm, an inner diameter of 8 mm, a thickness of 4 mm which is installed on the cylinder head, SS308 material with a surface smoothness level of N7, a total production cost of IDR 9,500/piece, a production process duration of 5 minutes/piece which implies that the bolt ring is suitable for use on 250 cm³ motorcycles produced in 2013.

Zitieren

APA

Jahfal, F. B. T. A., Hadi, S., Sholeh, M. F., Ubaidillah, A. H., & Sukamto, M. B. R. (2026). Produksi Ring Baut Diameter 16 x 4 mm Kepala Silinder, Bahan SS308, Kapasitas 12 Biji/Jam. Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika, 4(3), 108-121. https://doi.org/10.61132/jupiter.v4i3.1393

Vancouver

Jahfal FBTA, Hadi S, Sholeh MF, Ubaidillah AH, Sukamto MBR. Produksi Ring Baut Diameter 16 x 4 mm Kepala Silinder, Bahan SS308, Kapasitas 12 Biji/Jam. Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika. 2026;4(3):108-121. doi:10.61132/jupiter.v4i3.1393

BibTeX
@article{Jahfal2026,
  author = {Jahfal, Fitrah Bisma Taimullah Al and Hadi, Syamsul and Sholeh, Muhammad Farhad and Ubaidillah, Abdullah Hakim and Sukamto, Muhammad Bintang Ramadhan},
  title = {Produksi Ring Baut Diameter 16 x 4 mm Kepala Silinder, Bahan SS308, Kapasitas 12 Biji/Jam},
  journal = {Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika},
  year = {2026},
  volume = {4},
  number = {3},
  pages = {108--121},
  doi = {10.61132/jupiter.v4i3.1393}
}
Kostenlos starten →