Validation of the Performance of A 10 Kg/Hour Potato Masher Using Solidworks-Based Simulation and Experimental Methods
International Journal of Industrial Innovation and Mechanical Engineering · 18.08.2026 · 3 (3) · 71-84
DOI: 10.61132/ijiime.v3i3.449 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Industrial Innovation and Mechanical Engineering, online erschienen am 18.08.2026. Verfasst von Anggih Permata Putra und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Manual potato mashing is still limited in terms of efficiency and production capacity. This study aims to validate the performance of a 10 kg/h potato mashing machine using SolidWorks Simulation and experimental testing. The simulation analyzed the machine frame, main shaft, pestle pulley, and pestle using the parameters of von Mises stress, displacement, and factor of safety. The simulation results showed that all components experienced stress below the material yield strength, exhibited minimal deformation, and had a factor of safety greater than 1, indicating safe operating conditions. Experimental testing showed that the machine achieved an average production capacity of 9.39 kg/h, equivalent to 93.90% of the designed capacity, with an average processing time of 64 minutes and an average power consumption of 268.03 W, or 71.86% of the motor's rated power of 373 W (0.5 HP). Based on the simulation and experimental results, the potato mashing machine was confirmed to be safe, reliable, and capable of operating effectively in accordance with its design objectives.
Zitieren
APA
Putra, A. P., Wahid, S. M., & Komarudin, K. (2026). Validation of the Performance of A 10 Kg/Hour Potato Masher Using Solidworks-Based Simulation and Experimental Methods. International Journal of Industrial Innovation and Mechanical Engineering, 3(3), 71-84. https://doi.org/10.61132/ijiime.v3i3.449
Vancouver
Putra AP, Wahid SM, Komarudin K. Validation of the Performance of A 10 Kg/Hour Potato Masher Using Solidworks-Based Simulation and Experimental Methods. International Journal of Industrial Innovation and Mechanical Engineering. 2026;3(3):71-84. doi:10.61132/ijiime.v3i3.449
BibTeX
@article{Putra2026,
author = {Putra, Anggih Permata and Wahid, Septian Muhammad and Komarudin, Komarudin},
title = {Validation of the Performance of A 10 Kg/Hour Potato Masher Using Solidworks-Based Simulation and Experimental Methods},
journal = {International Journal of Industrial Innovation and Mechanical Engineering},
year = {2026},
volume = {3},
number = {3},
pages = {71--84},
doi = {10.61132/ijiime.v3i3.449}
}
EUVIMED