EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Implemantation of Non-Sensor Based Fuzzy Logic Control for G-Code Parameter Optimization: Advanced Efficiency in Titanium Alloy CNC Processing

I Made Aditya, Bryant Josua Runturambi, Jedithjah Naapia Tamedi Papia, Firmansyah Reskal Motulo, Jerry Heisye Purnama, Meike Negawati Kesek

Journal Electrical and Computer Experiences · 2024

DOI: 10.59535/jece.v2i2.363 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal Electrical and Computer Experiences, 2024. Verfasst von I Made Aditya und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research introduces an innovative algorithm for G-code modification using Fuzzy Logic Control (FLC) to optimize Computer Numerical Control (CNC) machining parameters without relying on additional hardware or sensors. The study develops a computational framework that processes G-code blocks with an average speed of 0.3ms while maintaining a minimal memory footprint of 1.2MB. Implementation results demonstrate an 18% reduction in total machining time, with the feed rate optimized from 1000 mm/min to 1180 mm/min for linear cutting and spindle speed enhanced from 3000 RPM to 3450 RPM, while maintaining conservative parameters for critical plunge cutting operations. The system achieved a 23% increase in tool life through intelligent parameter modulation. Testing on titanium alloy workpieces showed consistent performance with zero machining interruptions during parameter modification, marking a five-fold improvement in processing speed compared to existing sensor-based systems. This hardware-independent approach enables rapid deployment in existing CNC systems through simple software updates, offering a cost-effective solution for machining optimization. The research establishes a foundation for intelligent G-code generation that adapts to material properties and cutting conditions while maintaining operational safety and efficiency.

Zitieren

APA

Aditya, I. M., Runturambi, B. J., Papia, J. N. T., Motulo, F. R., Purnama, J. H., & Kesek, M. N. (2024). Implemantation of Non-Sensor Based Fuzzy Logic Control for G-Code Parameter Optimization: Advanced Efficiency in Titanium Alloy CNC Processing. Journal Electrical and Computer Experiences. https://doi.org/10.59535/jece.v2i2.363

Vancouver

Aditya IM, Runturambi BJ, Papia JNT, Motulo FR, Purnama JH, Kesek MN. Implemantation of Non-Sensor Based Fuzzy Logic Control for G-Code Parameter Optimization: Advanced Efficiency in Titanium Alloy CNC Processing. Journal Electrical and Computer Experiences. 2024. doi:10.59535/jece.v2i2.363

BibTeX
@article{Aditya2024,
  author = {Aditya, I Made and Runturambi, Bryant Josua and Papia, Jedithjah Naapia Tamedi and Motulo, Firmansyah Reskal and Purnama, Jerry Heisye and Kesek, Meike Negawati},
  title = {Implemantation of Non-Sensor Based Fuzzy Logic Control for G-Code Parameter Optimization: Advanced Efficiency in Titanium Alloy CNC Processing},
  journal = {Journal Electrical and Computer Experiences},
  year = {2024},
  doi = {10.59535/jece.v2i2.363}
}
Kostenlos starten →