EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Pengembangan Digital Pressure Meter Berbasis IoT untuk Pengujian Tekanan Suction Pump dan Pencatatan Data Otomatis

Abdul Haris Kuspranoto, Muhammad Ulin Nuha ABA, Fanhas Andika Hermawan

MEDIKA TRADA · 07.08.2026 · 7 (1) · 77-83

DOI: 10.59485/tegvr105 ↗

Kurz gefasst

Fachartikel in der Zeitschrift MEDIKA TRADA, online erschienen am 07.08.2026. Verfasst von Abdul Haris Kuspranoto und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A suction pump requires periodic vacuum-pressure verification to support consistent performance assessment and reliable documentation. This study developed an Internet of Things (IoT)-based Digital Pressure Meter (DPM) that displays pressure in mmHg, Pascal (Pa), and bar and transmits measurement records to Google Sheets. The device integrated an Arduino Mega 2560, an MPX5050DP pressure sensor, a DHT22 sensor, a TFT LCD, and an ESP8266 module. Testing was performed at 0, 50, 100, 150, and 200 mmHg with five repetitions at each point and comparison against a Fluke DPM4. The analysis included mean, standard deviation, coefficient of variation, bias, mean absolute percentage error (MAPE), and linear regression. Across the four non-zero points, the relative error against the set pressure ranged from 1.75% to 4.02%, with a MAPE of 2.68%; the coefficient of variation ranged from 0.40% to 2.95%. The relationship between set pressure and device output was y = 0.9735x + 1.0804 with R² = 0.9996. Relative differences from the reference-device means ranged from 1.12% to 5.02%, averaging 2.61%. The IoT system successfully stored pressure, timestamp, serial number, temperature, and humidity; however, decimal formatting for bar values was inconsistent in Google Sheets. The prototype demonstrated strong linearity and repeatability as a pressure-testing and documentation aid. Further work should establish measurement uncertainty, hysteresis, long-term stability, and metrological traceability before the device is used as a calibration standard.

Zitieren

APA

Kuspranoto, A. H., ABA, M. U. N., & Hermawan, F. A. (2026). Pengembangan Digital Pressure Meter Berbasis IoT untuk Pengujian Tekanan Suction Pump dan Pencatatan Data Otomatis. MEDIKA TRADA, 7(1), 77-83. https://doi.org/10.59485/tegvr105

Vancouver

Kuspranoto AH, ABA MUN, Hermawan FA. Pengembangan Digital Pressure Meter Berbasis IoT untuk Pengujian Tekanan Suction Pump dan Pencatatan Data Otomatis. MEDIKA TRADA. 2026;7(1):77-83. doi:10.59485/tegvr105

BibTeX
@article{Kuspranoto2026,
  author = {Kuspranoto, Abdul Haris and ABA, Muhammad Ulin Nuha and Hermawan, Fanhas Andika},
  title = {Pengembangan Digital Pressure Meter Berbasis IoT untuk Pengujian Tekanan Suction Pump dan Pencatatan Data Otomatis},
  journal = {MEDIKA TRADA},
  year = {2026},
  volume = {7},
  number = {1},
  pages = {77--83},
  doi = {10.59485/tegvr105}
}
Kostenlos starten →