Fabrication of a Lower Limb Prosthetic Socket using Topology Optimization and Additive Manufacturing
International Journal of Applied Mechanics and Engineering · 17.08.2026
DOI: 10.59441/ijame/221487 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Applied Mechanics and Engineering, online erschienen am 17.08.2026. Verfasst von Mohammed Irfan Khan und 3 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The contact between the artificial leg (prosthesis) and an amputees residual limb is a significant factor in the success of prosthetic fitting and overall comfort. An improper interface can result in issue such as pressure sores, skin irritation, residual limb pain and discomfort for the amputee. The prosthetic socket bridges the gap between the two. In this work, the customized complex geometry of the prosthetic socket is developed using advanced 3D scanning technology of the residual limb. Following the accurate 3D scan of the residual limb, the development of a Computer-Aided Design (CAD) model is a critical next step in the development of customized prosthetic socket. The raw 3D scan data undergoes a process that transforms the information into a more refined and functional design suitable for manufacturing the socket. Given the strength-to-weight ratio already presented as a challenge for socket, the prosthetic socket needs to be made as light as possible. This makes it challenging to maintain strength and optimal structure for the prosthetic socket by just removing unwanted material; therefore, the topology optimization technique is adopted. The process revealed that extra material existed at the stress location on the socket. In the following stage a new customized design is developed possessing low weight maintaining the structural as well as functional integrity of the socket. The final geometry of the customized socket is almost impossible to fabricate from conventional method. Hence it was printed using Fused Deposition Method (FDM), and used for the patient.
Zitieren
APA
Khan, M. I., Nayak, C., Nagwal, R., & Mishra, S. (2026). Fabrication of a Lower Limb Prosthetic Socket using Topology Optimization and Additive Manufacturing. International Journal of Applied Mechanics and Engineering. https://doi.org/10.59441/ijame/221487
Vancouver
Khan MI, Nayak C, Nagwal R, Mishra S. Fabrication of a Lower Limb Prosthetic Socket using Topology Optimization and Additive Manufacturing. International Journal of Applied Mechanics and Engineering. 2026. doi:10.59441/ijame/221487
BibTeX
@article{Khan2026,
author = {Khan, Mohammed Irfan and Nayak, Chitresh and Nagwal, Rita and Mishra, Shashank},
title = {Fabrication of a Lower Limb Prosthetic Socket using Topology Optimization and Additive Manufacturing},
journal = {International Journal of Applied Mechanics and Engineering},
year = {2026},
doi = {10.59441/ijame/221487}
}
EUVIMED