EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Effect of Annular Fin Geometry on Thermo-Hydraulic Characteristic of Round Heat Sinks: An Experimental Study

Zainab Ahmed Salih, Ehsan Fadhil Abbas

International Journal of Applied Mechanics and Engineering · 17.08.2026

DOI: 10.59441/ijame/220435 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Mechanics and Engineering, online erschienen am 17.08.2026. Verfasst von Zainab Ahmed Salih und 1 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study experimentally investigates the influence of annular fin geometry on thermo-hydraulic performance under crossflow forced-convection conditions. Four heat sink configurations—a constant cross-section fin, a stepped fin, a modified stepped fin, and a triangular fin—were tested using an open-channel rig over 36 operating conditions formed by three air velocities (2–6 m/s) and three electrical input powers (13–39 W). The results show that the Nusselt number increases with Reynolds number for all geometries, with average enhancements of approximately 10–15%, 20–25%, and 30–35% for the stepped, modified stepped, and triangular fins, respectively, compared to the baseline. Pressure drop also increased with Reynolds number, with the modified stepped fin exhibiting the highest penalty, while the triangular fin maintained a more moderate increase. At fixed Reynolds numbers, the effect of input power was secondary, confirming the dominance of flow inertia and geometry. Geometry-specific Nusselt number correlations with coefficients of determination exceeding 0.95 were developed, and the analytical model for the baseline fin was validated against experimental data with deviations below 2%.

Zitieren

APA

Salih, Z. A., & Abbas, E. F. (2026). Effect of Annular Fin Geometry on Thermo-Hydraulic Characteristic of Round Heat Sinks: An Experimental Study. International Journal of Applied Mechanics and Engineering. https://doi.org/10.59441/ijame/220435

Vancouver

Salih ZA, Abbas EF. Effect of Annular Fin Geometry on Thermo-Hydraulic Characteristic of Round Heat Sinks: An Experimental Study. International Journal of Applied Mechanics and Engineering. 2026. doi:10.59441/ijame/220435

BibTeX
@article{Salih2026,
  author = {Salih, Zainab Ahmed and Abbas, Ehsan Fadhil},
  title = {Effect of Annular Fin Geometry on Thermo-Hydraulic Characteristic of Round Heat Sinks: An Experimental Study},
  journal = {International Journal of Applied Mechanics and Engineering},
  year = {2026},
  doi = {10.59441/ijame/220435}
}
Kostenlos starten →