EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and characterization of azo polymers based on chitosan and acrylamide derivatives

Nawar Jamal Abdulrada, Mohammed Ali Mutar

Applied Chemical Engineering · 04.11.2026

DOI: 10.59429/ace.v9i4.6102 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Chemical Engineering, online erschienen am 04.11.2026. Verfasst von Nawar Jamal Abdulrada und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two azo-containing materials, an acrylamide-derived azo compound (AZO 1) and a chitosan-derived azo material (AZO-chitosan 2), were prepared by diazo coupling with o-cresol under alkaline conditions at 0–5 °C. The acrylamide-derived monomer was subsequently converted to an azo polymer by free-radical photopolymerization under nitrogen using 1-hydroxycyclohexyl phenyl ketone (Irgacure 184) as the photoinitiator. The products were characterized by FTIR, ¹H NMR, and ¹³C NMR spectroscopy, and their thermal behavior was evaluated by TGA and DSC. The acrylamide-derived azo compound was obtained in 78% yield, whereas the AZO-chitosan product was obtained in 70% yield. The spectral changes support formation of the azo-containing products and consumption of the polymerizable double bond. The two polymer samples showed TGA onset temperatures of 110 and 100 °C, 50% mass-loss temperatures of 260 and 270 °C, and residues of 92% and 90% at 600 °C, respectively. DSC gave glass-transition temperatures of 180 and 250 °C. These results establish the structural and preliminary thermal characteristics of the prepared materials. Molecular-weight distribution and photoisomerization were not measured and therefore remain subjects for further study.

Zitieren

APA

Abdulrada, N. J., & Mutar, M. A. (2026). Synthesis and characterization of azo polymers based on chitosan and acrylamide derivatives. Applied Chemical Engineering. https://doi.org/10.59429/ace.v9i4.6102

Vancouver

Abdulrada NJ, Mutar MA. Synthesis and characterization of azo polymers based on chitosan and acrylamide derivatives. Applied Chemical Engineering. 2026. doi:10.59429/ace.v9i4.6102

BibTeX
@article{Abdulrada2026,
  author = {Abdulrada, Nawar Jamal and Mutar, Mohammed Ali},
  title = {Synthesis and characterization of azo polymers based on chitosan and acrylamide derivatives},
  journal = {Applied Chemical Engineering},
  year = {2026},
  doi = {10.59429/ace.v9i4.6102}
}
Kostenlos starten →