Experimental mixed plastic waste pyrolysis in Iraq: Polymer composition, catalytic parameters, simulation, and Techno-Economic assessment
Applied Chemical Engineering · 30.10.2024
DOI: 10.59429/ace.v9i3.6152 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Chemical Engineering, online erschienen am 30.10.2024. Verfasst von Ahmed H. Nahi und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The accumulation of mixed Waste plastic represents an environmental challenge in Iraq. This study investigates the catalytic Pyrolysis of combined waste plastic composed of 30% LDPE, 30% HDPE, 15% PP, 20% PET, and 5% PS. Pyrolysis experiments were conducted using 250 g of Waste made of plastic per experiment at the temperature ranges from 400°C to 500°C under catalyst conditions. A CaO catalyst derived from eggshell waste was prepared and compared with a zeolite catalyst. The impact of temperature, reaction time, and catalyst type were evaluated. The optimal conditions resulted in the highest oil yield of 83.6 wt.% at 500°C, a reaction time of 90 minutes, and a 10% catalyst concentration. Experiments with individual plastic types showed the highest oil yields: 70.8% for LDPE using CaO, 63.2% for HDPE using CaO, 76% for PP without a catalyst, and 82% for PS without a catalyst. the pyrolysis oil was characterized by its density, viscosity, sulphur content, and fuel properties. GC-MS The analysis demonstrated the existence of valuable hydrocarbon compounds, particularly alkenes, alkanes, and aromatic compounds. The composition of the oil obtained from these experiments was incorporated into the Aspen Plus program for developing a 1000-ton/day industrial model. The techno-economic evaluation indicated a plant cost of approximately $25.88 million, with a payback period of 0.9 years and an income on investment of 111.4%, based on the assumed Iraqi market. This study provides an integrated pathway from catalytic pyrolysis experiments to industrial design and economic evaluation for sustainable Waste plastic management in Iraq.
Zitieren
APA
Nahi, A. H., & Jazie, A. A. (2024). Experimental mixed plastic waste pyrolysis in Iraq: Polymer composition, catalytic parameters, simulation, and Techno-Economic assessment. Applied Chemical Engineering. https://doi.org/10.59429/ace.v9i3.6152
Vancouver
Nahi AH, Jazie AA. Experimental mixed plastic waste pyrolysis in Iraq: Polymer composition, catalytic parameters, simulation, and Techno-Economic assessment. Applied Chemical Engineering. 2024. doi:10.59429/ace.v9i3.6152
BibTeX
@article{Nahi2024,
author = {Nahi, Ahmed H. and Jazie, Ali A.},
title = {Experimental mixed plastic waste pyrolysis in Iraq: Polymer composition, catalytic parameters, simulation, and Techno-Economic assessment},
journal = {Applied Chemical Engineering},
year = {2024},
doi = {10.59429/ace.v9i3.6152}
}
EUVIMED