Effect of evaporation boat waste particle size on the characterization of crucible specimens
Applied Chemical Engineering · 08.06.2026
DOI: 10.59429/ace.v9i2.5927 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Chemical Engineering, online erschienen am 08.06.2026. Verfasst von Rusiyanto Rusiyanto und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The demand for high-performance crucibles in metal casting and smelting industries has led to an increasing interest in alternative materials due to the limitations of traditional graphite-based crucibles. Evaporation boat waste, primarily composed of boron nitride (BN) and titanium diboride (TiB2), offers a sustainable alternative but has not been fully explored for crucible production. Additionally, the influence of particle size on material properties such as density, porosity, and macrostructure remains under-researched. This study aims to address this gap by examining the effects of particle size and sodium silicate binder on the physical properties of crucibles made from evaporation boat waste. Crucibles were prepared with varying particle sizes (100, 120, 140, 170, and 200 mesh) and a 15% sodium silicate binder. Density, porosity, and macrostructure were analyzed, showing that smaller particle sizes led to higher density and lower porosity. Optical macrostructure analysis indicated a more homogeneous and compacte structure for finer particles. The results showed that the 200 mesh particle size achieved the highest density of 2.138 g/cm³, representing a 5.1% increase over the lowest density of 2.0343 g/cm³. The 200 mesh sample also exhibited the lowest porosity of 1.14%, a 2.7% decrease from the largest particle size.
Zitieren
APA
Rusiyanto, R., Ismail, R., Bayuseno, A. P., Fitriyana, D. F., Bahatmaka, A., Sumbodo, W., Kurniadi, N., & Toh, W. G. (2026). Effect of evaporation boat waste particle size on the characterization of crucible specimens. Applied Chemical Engineering. https://doi.org/10.59429/ace.v9i2.5927
Vancouver
Rusiyanto R, Ismail R, Bayuseno AP, Fitriyana DF, Bahatmaka A, Sumbodo W, et al. Effect of evaporation boat waste particle size on the characterization of crucible specimens. Applied Chemical Engineering. 2026. doi:10.59429/ace.v9i2.5927
BibTeX
@article{Rusiyanto2026,
author = {Rusiyanto, Rusiyanto and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Fitriyana, Deni Fajar and Bahatmaka, Aldias and Sumbodo, Wirawan and Kurniadi, Ninda and Toh, Willy Gumilang},
title = {Effect of evaporation boat waste particle size on the characterization of crucible specimens},
journal = {Applied Chemical Engineering},
year = {2026},
doi = {10.59429/ace.v9i2.5927}
}
EUVIMED