Analysis of the effect of sandblasting on the surface roughness and coating adhesion of ASTM A36 plate
Applied Chemical Engineering · 08.06.2026
DOI: 10.59429/ace.v9i2.5922 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Chemical Engineering, online erschienen am 08.06.2026. Verfasst von Oki Suprada Ompusunggu und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The aim of this research is to examine the effect of variations in spraying pressure and distance on the surface roughness and coating quality of ASTM A36 steel. The method used is by comparing the results of the sandblasting using 60 mesh aluminium oxide abrasive material with a shooting angle of 90° at a distance of 5 cm and 10 cm with pressures of 4, 6 and 8 bar. Surface roughness and paint adhesion test is then done on the specimens. The roughness test showed that increasing sandblasting pressure did not have a direct correlation to the increase in surface roughness. Conversely, as the sandblasting distance increase from 5 cm to 10 cm, affected the surface roughness decreases. The highest mean Ra, Rp and Rz value were obtained from a nozzle distance of 5 cm at pressure of 8 bar with value of 4.125 μm, 11.746 μm and 25,773 μm respectively. Paint adhesion testing showed that the higher surface roughness did not necessarily result in better paint adhesion of the steel plates. Instead, surface morphology and coating thickness played a more dominant role in adhesion strength. These findings indicate that variations in pressure and distance during sandblasting significantly influence the surface texture and coating performance of ASTM A36 steel.
Zitieren
APA
Ompusunggu, O. S., Situmorang, R. S., Sembiring, P. G., Sidik, A. M., & Salim, E. V. (2026). Analysis of the effect of sandblasting on the surface roughness and coating adhesion of ASTM A36 plate. Applied Chemical Engineering. https://doi.org/10.59429/ace.v9i2.5922
Vancouver
Ompusunggu OS, Situmorang RS, Sembiring PG, Sidik AM, Salim EV. Analysis of the effect of sandblasting on the surface roughness and coating adhesion of ASTM A36 plate. Applied Chemical Engineering. 2026. doi:10.59429/ace.v9i2.5922
BibTeX
@article{Ompusunggu2026,
author = {Ompusunggu, Oki Suprada and Situmorang, Riky Stepanus and Sembiring, Pramio Garson and Sidik, Aldi Maulana and Salim, Edbert Vincent},
title = {Analysis of the effect of sandblasting on the surface roughness and coating adhesion of ASTM A36 plate},
journal = {Applied Chemical Engineering},
year = {2026},
doi = {10.59429/ace.v9i2.5922}
}
EUVIMED